Convert to PT Series
NEW
Use PT Series Part Number Crossover Tool to convert from 100, 200, 300 and 615 Series transmitters to new PT Series transmitters.
| Items |
 100V-2-1-3/25-vac-4 100V Series Creep Action, Brass Wetted Materials, NBR Diaphragm, 1 SPST, Normally Closed, 1/8" National Pipe Thread (NPT) Male, -3 to -25 inHg (350 psig), Spade Terminals (1/4" x 1/32") Pressure Switch |
100V-2-1-3/25-vac-77 100V Series Creep Action, Brass Wetted Materials, NBR Diaphragm, 1 SPST, Normally Closed, 1/8" National Pipe Thread (NPT) Male, -3 to -25 inHg (350 psig), 18" Flying Leads Pressure Switch |
100V-2-1-3/25-vac-96 100V Series Creep Action, Brass Wetted Materials, NBR Diaphragm, 1 SPST, Normally Closed, 1/8" National Pipe Thread (NPT) Male, -3 to -25 inHg (350 psig), Weatherpack Tower, 2-Pin Female Pressure Switch |
100V-2-1-3/25-vac-97 100V Series Creep Action, Brass Wetted Materials, NBR Diaphragm, 1 SPST, Normally Closed, 1/8" National Pipe Thread (NPT) Male, -3 to -25 inHg (350 psig), Weatherpack Tower, 2-Pin Male Pressure Switch |
100V-2-1-3/25-vac-98 100V Series Creep Action, Brass Wetted Materials, NBR Diaphragm, 1 SPST, Normally Closed, 1/8" National Pipe Thread (NPT) Male, -3 to -25 inHg (350 psig), Weatherpack Shroud, 2-Pin Female Pressure Switch |
|||||
| Description |
|
|||||||||
| Type | Mechanical Pressure Switch | |||||||||
| Series | 100 | |||||||||
| Switching Function | Single Pole Single Throw (SPST), Normally Closed | |||||||||
| Switch Adjustable Range | -3 to -25 inHg | |||||||||
| Electrical Connection | Spade Terminals (1/4 x 1/32) | 18 in. Flying Leads | Weatherpack Tower, 2-Pin Female, Attached to Flying Leads | Weatherpack Tower, 2-Pin Male, Attached to Flying Leads | Weatherpack Shroud, 2-Pin Female, Attached to Flying Leads | |||||
| Process Connection | National Pipe Thread (NPT) Male | |||||||||
| Weight | 0.2 lb | |||||||||
| Housing Material | Brass | |||||||||
| Optional Housing Material | Stainless Steel | |||||||||
| Switch Type | Creep Action | |||||||||
| Environmental Rating | Ingress Protection (IP00) | Ingress Protection (IP69) | Ingress Protection (IP69) | Ingress Protection (IP69) | Ingress Protection (IP69) | |||||
| Switching Current | 2 A | |||||||||
| Non-Repeatability | 1 psi or 5% of Setpoint | |||||||||
| Contact Material | Silver-Plated | |||||||||
| Optional Contact Material | Gold-Plated | |||||||||
| Frequency [Max] | 60 cpm | |||||||||
| Switch Point | Field Adjustable and/or Factory Set | |||||||||
| Hysteresis | <10% of Setpoint | |||||||||
| Service Life | > 1,000,000 Load Cycles | |||||||||
| Media Temperature Range | -25 to 85 ºC-13 to 185 ºF | |||||||||
| Ambient Temperature Range | -25 to 85 ºC-13 to 185 ºF | |||||||||
| Proof Pressure | 350 psi | |||||||||
| Measuring Element | Brass, NBR Diaphragm | |||||||||
| Warranty | 1 yr | |||||||||
| Application |
|
|||||||||
| Prop 65 Warnings |
 WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
|||||||||
| Limitations Which Apply Are |
These units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice. |
|||||||||
| Distribution Manifolds | NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths. | |||||||||
| Mechanical Switches Options & Accessories | Factory Adjusted Switch Point (Specify) | |||||||||
| Pressure Snubbers - Piston Type |
|
|||||||||
| Pressure Snubbers - Sintered Type |
|
|||||||||
| Steam Syphons |
|
|||||||||
| Swivel Adapters |
|
|||||||||
| Contact Rating | 100 V·A Maximum Voltage 42 Vdc | |||||||||
| Vacuum Pressure Switch Adjustable Ranges | -3 to -25 inHg | |||||||||
| Process Connection Size | 1/8 in | |||||||||
|
|
||||||||||
