MENU
NOSHOK'S COVID-19 Response
  • Switch adjustment ranges from vacuum through 6,000 psig depending on model
  • 200V & 200L: Standard Brass with NBR diaphragm wetted parts, 200H: Standard Zinc-nickel with NBR diaphragm wetted parts
  • SPST or SPDT snap-action switch with solid Silver contacts
  • RoHS compliant
Unit of Measure
Items
200-Series-Mechanical-Compact-SPDT-Pressure-Switches.jpg

200V Series Snap Action, Brass Wetted Materials, NBR Diaphragm, 1 SPDT, (NO/NC), 1/8" NPT, -5 to -25 inHg (350 psig), Spade Terminals (1/4" x 1/32") Mechanical Compact SPDT Pressure Switch

200-Series-Mechanical-Compact-SPDT-Pressure-Switches.jpg

200V Series Snap Action, Brass Wetted Materials, NBR Diaphragm, 1 SPDT, (NO/NC), 1/8" NPT, -5 to -25 inHg (350 psig), Deutsch Integral 3-Pin (DT04-3P) Mechanical Compact SPDT Pressure Switch

200-Series-Mechanical-Compact-SPDT-Pressure-Switches.jpg

200V Series Snap Action, Brass Wetted Materials, NBR Diaphragm, 1 SPDT, (NO/NC), 1/8" NPT, -5 to -25 inHg (350 psig), M12 x 1 3-Pin Mechanical Compact SPDT Pressure Switch

200-Series-Mechanical-Compact-SPDT-Pressure-Switches.jpg

200V Series Snap Action, Brass Wetted Materials, NBR Diaphragm, 1 SPDT, (NO/NC), 1/8" NPT, -5 to -25 inHg (350 psig), 18" Flying Leads Mechanical Compact SPDT Pressure Switch

200-Series-Mechanical-Compact-SPDT-Pressure-Switches.jpg

200V Series Snap Action, Brass Wetted Materials, NBR Diaphragm, 1 SPDT, (NO/NC), 1/8" NPT, -5 to -25 inHg (350 psig), Deutsch 3-Pin Male (DT04-3P) Mechanical Compact SPDT Pressure Switch
Description N/A
  • Switch adjustment ranges from vacuum through 6,00 psig depending on model
  • 200V & 200L: Standard Brass with NBR diaphragm wetted parts, 200H: Standard Zinc-nickel with NBR diaphragm wetted parts
  • SPST or SPDT snap-action switch with solid Silver contacts
  • RoHS compliant
Type N/A Mechanical Pressure Switch
Series N/A 200
Switching Function N/A Single Pole Double Throw (SPDT)
Switch Adjustable Range N/A -5 to -25 inHg
Electrical Connection N/A Spade Terminals (1/4 x 1/32) N/A Deutsch Integral 3-Pin (DT04-3P) N/A M12 x 1 3-Pin N/A 18 in. Flying Leads N/A Deutsch 3-Pin Male (DT04-3P), Attached to Flying Leads
Process Connection N/A National Pipe Thread (NPT) Male
Process Connection Size N/A 1/8 in
Weight N/A 0.2 lb
Housing Material N/A Zinc-Nickel Plated Steel
Switch Type N/A Snap Action
Environmental Rating N/A Ingress Protection (IP00) N/A Ingress Protection (IP69) N/A Ingress Protection (IP69) N/A Ingress Protection (IP69) N/A Ingress Protection (IP69)
Non-Repeatability N/A 1 psi or 5% of Setpoint
Contact Material N/A Solid Silver, Self-Cleaning
Optional Contact Material N/A Gold-Plated
Frequency [Max] N/A 100 cpm
Switch Point N/A Field Adjustable and/or Factory Set
Hysteresis N/A 4 to 6 inHg
Service Life N/A < 1,000,000 Load Cycles
Media Temperature Range N/A -20 to 80 ºC-4 to 176 ºF
Ambient Temperature Range N/A -20 to 80 ºC-4 to 176 ºF
Static Proof Pressure N/A 9,000 psi620 bar
Dynamic Proof Pressure N/A 7,500 psi517 bar
Vacuum Pressure Switch Adjustable Ranges N/A -5 to -25 inHg
Measuring Element N/A Brass, NBR Diaphragm
Warranty N/A 1 yr
Application N/A
  • Hydraulics & pneumatics
  • Pumps & compressors
  • Tank monitoring
  • Leak detection
  • Water management
Prop 65 Warnings N/A
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Limitations Which Apply Are N/A These units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer.

In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
Distribution Manifolds N/A NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Mechanical Switches Options & Accessories N/A Factory Adjusted Switch Point (Specify)
Pressure Snubbers - Piston Type N/A
  • Resist clogging and are self-cleaning
  • Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
  • Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
  • Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Pressure Snubbers - Sintered Type N/A
  • Cost effective solution to protect expensive instrumentation
  • Increases gauge readability by smoothing out pressure surges, pulsations and spikes
  • 5 basic elements available for each snubber to accommodate specific application needs
  • Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
  • Exotic materials or intermediate disc grades available
  • Provides long service life with no moving parts to wear out
  • Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Steam Syphons N/A
  • Protect the instrument from the damaging effects of high temperature steam
  • Recommended for use in all steam applications
  • Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF
Swivel Adapters N/A
  • Temperature ratings: 15,000 psi at 200 ºF and 3,000 psi at 1,000 ºF
  • Used with gauges and gauge valves to adjust the line of sight
  • Rotates 360º to allow the connected instrument to be positioned in the desired direction
  • The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
  • All 316 Stainless Steel construction
  • Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
  • Also available with 1/4" NPT connections, same specifications apply
  • Weight approximately 0.8 lb.
Contact Rating N/A 5A @ 12/24 Vdc 5A @ 125/250 Vac