Convert to PT Series
NEW
Use PT Series Part Number Crossover Tool to convert from 100, 200, 300 and 615 Series transmitters to new PT Series transmitters.
| Items |
 300V-3-2-5/28-vac-8 1 Single Pole Double Throw (SPDT), National Pipe Thread (NPT) Male Connection, -5 to -28 inHg Adjustment, DIN EN 175301-803 Form A Electrical Connection Mechanical Pressure Switch |
300V-3-2-5/28-vac-25 1 Single Pole Double Throw (SPDT), National Pipe Thread (NPT) Male Connection, -5 to -28 inHg Adjustment, M12 x 1 (4 Pin) Mechanical Pressure Switch |
300V-3-2-5/28-vac-36 1 Single Pole Double Throw (SPDT), National Pipe Thread (NPT) Male Connection, -5 to -28 inHg Adjustment, 3 ft Integral Cable Mechanical Pressure Switch |
300V-3-2-5/28-vac-101 1 Single Pole Double Throw (SPDT), National Pipe Thread (NPT) Male Connection, -5 to -28 inHg Adjustment, Deutsch 3-Pin Male (DT04-3P) Mechanical Pressure Switch |
300V-3-2-5/28-vac-104 1 Single Pole Double Throw (SPDT), National Pipe Thread (NPT) Male Connection, -5 to -28 inHg Adjustment, Deutsch 3-Pin Female Socket (DT06-3S) Mechanical Pressure Switch |
|||||
| Description |
|
|||||||||
| Type | Mechanical Switch | |||||||||
| Series | 300 | |||||||||
| Switching Function | Single Pole Double Throw (SPDT) | |||||||||
| Switch Adjustable Range | -5 to -28 inHg | |||||||||
| Electrical Connection | DIN EN 175301-803 Form A | M12 x 1 4-Pin | 3 ft Integral Cable | Deutsch 3-Pin Male (DT04-3P), Attached to 18 in. Cable | Deutsch 3-Pin Female Socket (DT06-3S), Attached to 18 in. | |||||
| Process Connection | National Pipe Thread (NPT) Male | |||||||||
| Weight | 0.2 lb | |||||||||
| Housing Material | Zinc-Nickel Plated Steel | |||||||||
| Switch Type | Snap Action with Adjustable Hysteresis | |||||||||
| Environmental Rating | Ingress Protection (IP65) | Ingress Protection (IP67) | Ingress Protection (IP67) | Ingress Protection (IP67) | Ingress Protection (IP67) | |||||
| Non-Repeatability | 2% of Full Set Point Range at 70 ºF | |||||||||
| Contact Material | Solid Silver, Self-Cleaning | |||||||||
| Frequency [Max] | 100 cpm | |||||||||
| Switch Point | Field Adjustable and/or Factory Set | |||||||||
| Hysteresis | Adjustable | |||||||||
| Service Life | < 1,000,000 Load Cycles | |||||||||
| Media Temperature Range | -20 to 80 ºC-4 to 176 ºF | |||||||||
| Ambient Temperature Range | -20 to 80 ºC-4 to 176 ºF | |||||||||
| Proof Pressure1 | 870 to 5,000 psig | |||||||||
| Measuring Element | NBR | |||||||||
| Warranty | 1 yr | |||||||||
| Application |
|
|||||||||
| Prop 65 Warnings |
 WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
|||||||||
| Limitations Which Apply Are |
These units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice. |
|||||||||
| Distribution Manifolds | NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths. | |||||||||
| Mechanical Switches Options & Accessories | Factory Adjusted Switch Point (Specify) | |||||||||
| Pressure Snubbers - Piston Type |
|
|||||||||
| Pressure Snubbers - Sintered Type |
|
|||||||||
| Swivel Adapters |
|
|||||||||
| Steam Syphons |
|
|||||||||
| Contact Rating | 6A @ 12/24 Vdc 6A @ 125/250 Vac | |||||||||
| Vacuum Pressure Switch Adjustable Ranges | -5 to -28 inHg | |||||||||
| Process Connection Size | 1/4 in | |||||||||
|
||||||||||
