MENU
NOSHOK'S COVID-19 Response
  • Combines isolating and venting in a single valve, eliminating the need for tubing and fittings
  • Block valve isolates the downstream process fluids, and the bleed valve exhausts upstream fluids enabling instruments to be removed without disturbing the permanent piping installation
  • The 1/4" NPT vent plug is located 90º to the left and may be removed and replaced with exhaust piping to direct the fluids to a safe location
Request Information
Unit of Measure
Items
200 Series Multiport Needle Valves with Hard Seat

3/4" National Pipe Thread (NPT) Male x 1/2" National Pipe Thread (NPT) Male, 316 Stainless Steel, Hard Seat Block and Bleed 2-Valve
2070 Series Block and Bleed 2 Needle Valves with Hard Seat

1/2" National Pipe Thread (NPT), Female x Male, Extended, Steel, Hard Seat, 0.187" Orifice Block and Bleed 2-Valve
2070 Series Block and Bleed 2 Needle Valves with Hard Seat

1/2" National Pipe Thread (NPT), Female x Male, Extended, 316 Stainless Steel, Hard Seat, 0.187" Orifice Block and Bleed 2-Valve
2070 Series Block and Bleed 2 Needle Valves with Hard Seat

1/2" National Pipe Thread (NPT), Male x Female, Extended, Steel, Hard Seat, 0.187" Orifice Block and Bleed 2-Valve
2070 Series Block and Bleed 2 Needle Valves with Hard Seat

1/2" National Pipe Thread (NPT), Male x Female, Extended, 316 Stainless Steel, Hard Seat, 0.187" Orifice Block and Bleed 2-Valve
Description N/A
  • Combines isolating and venting in a single valve, eliminating the need for tubing and fittings
  • Block valve isolates the downstream process fluids, and the bleed valve exhausts upstream fluids enabling instruments to be removed without disturbing the permanent piping installation
  • The 1/4" NPT vent plug is located 90º to the left and may be removed and replaced with exhaust piping to direct the fluids to a safe location
Type N/A Needle Valve
Series N/A 150
Connection Size N/A 1/4 in1/2 in3/4 in N/A 1/2 in N/A 1/2 in N/A 1/2 in N/A 1/2 in
Valve Type N/A Male-Male-Female N/A Extended Female-Male N/A Extended Female-Male N/A Extended Male-Female N/A Extended Male-Female
Valve Material N/A Stainless Steel N/A Steel N/A Stainless Steel N/A Steel N/A Stainless Steel
Material N/A Electropolished 316 Stainless Steel N/A Zinc-Nickel Plated Steel N/A Electropolished 316 Stainless Steel N/A Zinc-Nickel Plated Steel N/A Electropolished 316 Stainless Steel
Stem Seal and Type N/A All 316 Stainless Steel stems with Fluorocarbon (FKM) o-ring and Polytetrafluoroethylene (PTFE) back-up ring below the threads, Polytetrafluoroethylene (PTFE) or Graphite packing optional
Pressure Ratings at 200 Degree Fahrenheit (ºF) Temperature N/A 10,000 psi
Weight N/A 2.0 lb N/A 2.7 lb N/A 2.7 lb N/A 2.7 lb N/A 2.7 lb
Orifice Size N/A 0.187 in
Cv Coefficient N/A 0.44
Seat N/A Hard Seat
Packings N/A
Stem Tips Material N/A
O-Rings Material1 N/A
Handles N/A
Process Type N/A 2-Valve Block and Bleed
Length N/A 4 in N/A 5-3/8 in N/A 5-3/8 in N/A 5-3/8 in N/A 5-3/8 in
Options N/A
Additional Options N/A
  • Stem Tips
    • Ball (440C stainless) (T5)
    • Ball (carbide) (T6)
    • Ball (ceramic) (T7)
    • Ball (Monel) (T8)
    • Non-rotating regulating (316 Stainless) (T9)
  • O-Rings
    • EPDM (EM1)
    • FFKM (Perfluoroelastomer 3018 or equivalent) (KZ1)
  • Handles
    • 2-1/2" "T" (HL2)
    • 1" Round knurled (HL3)
    • 1-3/8" Phenolic (HL4)
    • 1-3/4" Phenolic (HL5 )
Prop 65 Warnings N/A
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Limitations Which Apply Are N/A These units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.

In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
Additional Information N/A
  • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
  • Blow-out proof stem provides a secondary stem seal in the full open position
  • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Graphite packing optional
  • All stem threads are rolled for strength and ease of operation
  • One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
  • Slotted spring pin to prevent accidental loosening
  • Vinyl dust cap for bonnet and stem (non-packing)
Installed Options and Accessories N/A
  • Packing (If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the Pressure vs. Temperature: Packing Style with Compatible Fluid chart Options Reference Chart)
    • PTFE (P1)
    • Graphite (P2)
  • Stem Tips
    • Non-rotating (316 Stainless Steel) (T1)
    • Ball, 440C Stainless Steel (T5)
    • Ball, carbide (T6)
    • Ball, ceramic (T7)
    • Ball, Monel (T8)
    • Non-rotating regulating, 316 Stainless Steel (T9)
  • O-Rings (Other o-ring materials available on request)
    • EPDM (EM1)
    • FFKM (Perfluoroelastomer) 3018 or equivalent (KZ1)
    • NBR (NB1)
  • Panel Mount
    • 1 nut (PM1)
    • 2 nuts (PM2)
  • Handles
    • 1-13/16" Mini T-Handle (HL1)
    • 2-1/2" T-Handle (HL2)
    • 1" Round Knurled Handle (HL3)
    • 1-3/8" Phenolic Handle (HL4)
    • 1-3/4" Phenolic Handle (HL5)
  • Cleaning For Oxygen Service (Stainless Steel Only)
Uninstalled Options and Accessories N/A Bleed Plug, Stainless Steel, 1/4" NPT (BP2-S)
Assembly Options N/A NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
Note N/A Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are block "T" handles (HL2) and bleed mini "T" handles (HL1).

The handle material will always match the material of the valve, unless otherwise specified. For example, the "T" handle (HL2) on the 2070-FFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.

All NOSHOK valve products conform to the MSS SP-99 instrument valves standards, and valves supplied with packing also conform to MSS SP-132 compression packing systems for instrument valves standard.
  • 1 Other o-ring materials available on request.