MENU
NOSHOK'S COVID-19 Response
  • Multiport design reduces the number of gauge and other instrument connections to permanent piping installations, decreasing possible leak paths
  • Optional bleed plugs further allow pressure to be bled off without disturbing the permanent piping installation
  • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
  • Replaceable Acetal seat and straight through porting for bidirectional, high capacity flow and easy roddable cleaning
  • Blow-out proof stem provides a secondary stem seal in the full open position
Request Information
Unit of Measure
Items
200 Series Multiport Needle Valves with Hard Seat

1/2" National Pipe Thread (NPT), Male x Female, Steel, 0.187" Orifice Soft Seat Multiport Valve
200 Series Multiport Needle Valves with Hard Seat

1/2" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.187" Orifice Soft Seat Multiport Valve
200 Series Multiport Needle Valves with Hard Seat

1/2" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.187" Orifice Soft Seat Multiport Valve with Polytetrafluoroethylene (PTFE) Packing
200 Series Multiport Needle Valves with Hard Seat

3/4" x 1/2" National Pipe Thread (NPT), Male x Female, Steel, 0.187" Orifice Soft Seat Multiport Valve
200 Series Multiport Needle Valves with Hard Seat

3/4" x 1/2" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.187" Orifice Soft Seat Multiport Valve
Description N/A
  • Multiport design reduces the number of gauge and other instrument connections to permanent piping installations, decreasing possible leak paths
  • Optional bleed plugs further allow pressure to be bled off without disturbing the permanent piping installation
  • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
Type N/A Needle Valve
Series N/A 300
Material N/A Zinc-Nickel Plated Steel N/A Electropolished 316 Stainless Steel N/A Electropolished 316 Stainless Steel N/A Electropolished 316 Stainless Steel N/A Electropolished 316 Stainless Steel
Stem Seal and Type N/A All 316 Stainless Steel stems with Fluorocarbon (FKM) o-ring and Polytetrafluoroethylene (PTFE) back-up ring below the threads, Polytetrafluoroethylene (PTFE) packing optional
Pressure Ratings at 200 Degree Fahrenheit (ºF) Temperature N/A 6,000 psi
Weight N/A 2.2 lb
Orifice Size N/A 0.187 in
Cv Coefficient N/A 0.64
Connection Size N/A 1/2 in N/A 1/2 in N/A 1/2 in N/A 3/4 x 1/2 in N/A 3/4 x 1/2 in
Seat N/A Hard Seat
Valve Material N/A Steel N/A Stainless Steel N/A Stainless Steel N/A Steel N/A Stainless Steel
Packings N/A N/A N/A Polytetrafluoroethylene (PTFE) N/A N/A
Warranty N/A 3 yr
Connection Type N/A Male National Pipe Thread (MNPT) x Female National Pipe Thread (FNPT)
Prop 65 Warnings N/A
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Additional Options N/A
  • Soft Seats
    • PEEK (PK1)
    • PCTFE (KF1)
  • Stem Tips
    • Non-rotating (316 stainless) (T1 )
  • O-Rings
    • EPDM (EM1)
    • FFKM (Perfluoroelastomer 3018 or equivalent) (KZ1)
    • NBR (NB1)
  • Panel Mountings
    • Panel mount (1 nut) (PM1)
    • Panel mount (2 nuts) (PM2)
  • Handles
    • 1-3/8" Phenolic (HL4)
    • 1-3/4" Phenolic (HL5 )
Additional Information N/A
  • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE packing optional
  • All stem threads are rolled for strength and ease of operation
  • One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
  • Slotted spring pin to prevent accidental loosening
  • Vinyl dust cap for bonnet and stem (non-packing)
Installed Options and Accessories N/A
  • Soft Seats
    • PEEK (PK1)
    • PCTFE (KF1)
  • Packing
    • PTFE (P1)
  • Stem Tips
    • Non-rotating (316 Stainless Steel) (T1)
  • O-Rings (Other o-ring materials available on request)
    • EPDM (EM1)
    • FFKM (Perfluoroelastomer) 3018 or equivalent (KZ1)
    • NBR (NB1)
  • Panel Mount
    • 1 nut (PM1)
    • 2 nuts (PM2)
  • Handles
    • 1-3/8" Phenolic Handle (HL4)
    • 1-3/4" Phenolic Handle (HL5)
  • Cleaning For Oxygen Service (Stainless Steel Only)
Assembly Options N/A NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
Uninstalled Options and Accessories N/A
  • Plug, Steel (PG1-CS1-ZN1)
  • Plug, Stainless Steel (PG1-SS1-EP)
  • Bleed Plug, Steel, 1/2" NPT (BP1-C)
  • Bleed Plug, Stainless Steel, 1/2" NPT (BP1-S)
  • Bleed Plug, Stainless Steel, 1/4" NPT (BP2-S)
Bleed Valve N/A Bleed valves provide a convenient means to relieve process pressures trapped between a shut off valve and the instrument.
Related Items N/A , 1/2" National Pipe Thread (NPT), Male, 316 Stainless Steel, Hard Seat 0.159" Bleed Port Valve
, 1/2" National Pipe Thread (NPT) Stainless Steel Bleed Plug
, 1/2" National Pipe Thread (NPT) Stainless Steel Plug
Note N/A Plugs and bleed plugs are available and can be ordered separately.

Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are "T" handles (HL2).

The handle material will always match the material of the valve, unless otherwise specified. For example, the "T" handle (HL2) on the 204-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests

All NOSHOK valve products conform to the MSS SP-99 instrument valves standards, and valves supplied with packing also conform to MSS SP-132 compression packing systems for instrument valves standard.

Other o-ring materials available on request.