MENU
NOSHOK'S COVID-19 Response
Request Information
  • Allows a temperature instrument to be removed and replaced without shutting down and draining the process
  • Reduces the possibility of damage to the temperature instrument
  • Provides protection to the operator
  • 1/2" NPSM instrument connection, 3/4" NPT process connection standard - 1/2" NPT, 1" NPT, flanged and sanitary options available
  • 150 Class and 300 Class raised face flanged thermowells available
Unit of Measure

Specifications

Type

 N/A Thermowell

Process Connection Size

 N/A 3/4 in

Stem Length

 N/A 2-1/2 in

Material

 N/A 316 Stainless Steel

Style

 N/A Straight Shank

Process Connection Type

 N/A National Pipe Thread (NPT)

Instrument Connection Size

 N/A 1/2 in

Instrument Connection Type

 N/A National Pipe Straight Mechanical (NPSM)

Pressure Ratings at 70 Degree Fahrenheit (ºF)

 N/A 7,000 psi

Bore Size

 N/A 0.260 in6.35 mm

Shank Diameter [Max]

 N/A 0.750 in19.05 mm

Insertion Diameter B [Max]

 N/A 3/4 in19.05 mm

Warranty

 N/A 1 yr

Stock

 N/A Yes

Unit Net Weight

 N/A 0.24 lb

Application

Application

 N/A
  • Recommended wherever the process being measured is under pressure, corrosive, abrasive, or moving at a high velocity
  • HVAC
  • Petrochemical
  • Oil and gas
  • Process (flanged thermowells)

Prop 65 Warnings

Prop 65 Warnings

 N/A
WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Limitations Which Apply Are

Limitations Which Apply Are

 N/A These units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.

In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.

Additional Information

Additional Information

 N/A
  • The Female thread will accept the 1/2" NPT Male thread without galling or seizing
  • Brass, 304 Stainless Steel, or 316 Stainless Steel standard material options - other options available
  • Standard style is stepped, available in straight, tapered and lagging options
  • Multiple lagging lengths available

Note

Note

 N/A Flange Connection not available.