MENU
NOSHOK'S COVID-19 Response
Request Information
This enclosure is designed for use with the 1950 units. The enclosures are large enough to accommodate a Power Supply (PS3) attached to the unit. These rugged enclosures are fabricated of formed steel with all seams welded to withstand NEMA 4/IP65 wash-down applications.
Unit of Measure

Specifications

Industry Standards/Certifications

 N/A National Electrical Manufacturers Association (NEMA) 4

Type

 N/A Enclosure

Material

 N/A Steel

Finish

 N/A Black Polyurethane

Series

 N/A 1950

Degree of Protection

 N/A Ingress Protection (IP65)

Warranty

 N/A 1 yr

Stock

 N/A Yes

Limited Warranty

Limited Warranty

 N/A NOSHOK'S One Year Warranty applies to these products. NOSHOK warrants these products to be free from defects in materials and workmanship, to remain within cataloged accuracy specifications, and to operate within the cataloged performance specifications. Limitations which apply are: These units must be operated within the cataloged environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.

Mounting the Enclosure

Mounting the Enclosure

 N/A
  1. Self-stick foot pads may be applied to the features on the bottom of the enclosure to protect the mounting surface.
  2. To securely mount the enclosure, attach the adjustable mounting brackets to the enclosure using the plastic washers and screws. Mounting brackets may be attached to the top or bottom of the enclosure.
  3. Secure the adjustable mounting brackets to mounting location with the screws provided.

Additional Information

Additional Information

 N/A The kits are coated with a durable black polyurethane finish. The holes for conduit fittings or other types of wiring connectors can be drilled through the removable rear access panel, or through the enclosure itself. The enclosures can be free standing or securely fastened to a mounting surface with the brackets and hardware found in the mounting kit (provided with the enclosure). The brackets also allow the enclosure to be raised and/or tilted from the mounting surface in order to achieve the most favorable operating position. Provided are four self-stick foot pads that can be applied to the bottom of the enclosure to protect the mounting surface. The foot pads are particularly useful for free standing installations.