MENU
NOSHOK'S COVID-19 Response
Request Information
  • Compound and standard ranges from 0 psig to 10 psig through 0 psig to 7,500 psig
  • 316L Stainless Steel wetted parts
  • Current and voltage outputs available
Unit of Measure

Specifications

Type

 N/A Electronic Indicating Pressure Switch

Series

 N/A 800

Switching Function

 N/A 1 Normally Open (N.O.) or Normally Closed (N.C.) (Positive-Negative-Positive (P-N-P) or Negative-Positive-Negative (N-P-N)) with 0 Vdc to 10 Vdc 3-wire output

Process Connection Size

 N/A 1/4 in

Process Connection

 N/A Male National Pipe Thread (MNPT)

Switch Adjustable Range

 N/A 0 to 5,000 psig

Electrical Connection

 N/A M12 x 1 (4-pin)

Accuracy

 N/A ≤ 0.5% of span

Service Life

 N/A 10,000,000 load cycles

Display

 N/A 14 segment-LED, red 4-digit, height 0.35"

Direct Current (DC) Voltage

 N/A 15 to 35 V

Current Consumption

 N/A Max. 45 mA for versions without 4-20 mA output signal
Max. 70 mA for versions with 4-20 mA output signal
Total consumption max. 600 mA including switching current

Proof Pressure

 N/A 2 Times Full Scale

Measuring Element

 N/A <150 psi: 316L Stainless steel
≥ 150 psi: 316L, PH grade Stainless steel

Housing Material

 N/A 304 Stainless Steel

Connection Material

 N/A 316 Stainless Steel

Degree of Protection

 N/A Ingress Protection (IP65) and Ingress Protection (IP67) per International Electrotechnical Commission (IEC) 60529

Industry Standards/Certifications

 N/A European Conformity (CE) Compliant to Electromagnetic Compatibility (EMC) Norm European Standards (EN) 61326:2014/A1:1998, Radio Frequency Interference (RFI), Electromagnetic Interference (EMI) and Electrostatic Discharge (ESD) Protection

Electrical Protection

 N/A Protected against reverse polarity, over-voltage and short circuit

Shock According to International Electrotechnical Commission (IEC) 60068-2-27

 N/A < 50 g

Vibration According to International Electrotechnical Commission (IEC) 60068-2-6

 N/A < 20 g

Weight

 N/A 0.49 lb

Related Items

 N/A , 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve
, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve

Temperature Ranges

Operating Temperature [Min]

 N/A -20 ºC-4 ºF

Operating Temperature [Max]

 N/A 70 ºC158 ºF

Media Temperature Range

 N/A -20 to 80 ºC-4 to 185 ºF

Ambient Temperature Range

 N/A -20 to 80 ºC-4 to 176 ºF

Compensated Temperature Range

 N/A 0 to 80 ºC32 to 176 ºF

Switching Parameters

Switch Parameter

 N/A Individually adjustable via external control keys

Switching Number

 N/A 1 2

Contact Rating Current [Max]

 N/A 250 mA

Response Time

 N/A ≤ 5 ms

Switch Point

 N/A 0.25 to 100% of full scale

Hysteresis

 N/A Fully Adjustable

Transmitter Parameters

Output Signal

 N/A 4 mA to 20 mA or 0 Vdc to 10 Vdc; programmable and freely adjustable

Accuracy for Transmitter Parameter

 N/A ≤ ±0.5% of span including non-linearity, hysteresis, zero offset and end value deviation (corresponds to measured error per IEC 61298-2)

Non-Repeatability

 N/A < 0.1% of span (IEC 61298-2)

Adjustment

 N/A Freely scalable within the range of 5:1

Application

Application

 N/A
  • Hydraulics & pneumatics
  • Power generation
  • Pumps & compressors
  • Stamping & forming presses
  • Water & wastewater

Prop 65 Warnings

Prop 65 Warnings

 N/A
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Additional Information

Additional Information

 N/A
  • 7 different output configurations available
  • Display and electrical connection can be rotated independently
  • CE compliant to suppress RFI, EMI and ESD
  • RoHS compliant
  • Ideal for applications including hydraulics & pneumatics, power generation, pumps & compressors, stamping & forming presses and water & wastewater

Options and Accessories

Options and Accessories

 N/A
  • Stainless Steel Threaded Orifice (ST8)
  • Single Factory Adjusted Switch Point (Specify)
  • Double Factory Adjusted Switch Point (Specify)

Diaphragm Seals

 N/A NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.

Digital Indicators

 N/A NOSHOK Digital Indicators provide local indication for pressure, level and temperature transmitters.

Distribution Manifolds

 N/A NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.

Pressure Snubbers - Piston Type

 N/A
  • Resist clogging and are self-cleaning
  • Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
  • Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
  • Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"​​​​​​

Pressure Snubbers - Sintered Type

 N/A
  • Cost effective solution to protect expensive instrumentation
  • Increases gauge readability by smoothing out pressure surges, pulsations and spikes
  • 5 basic elements available for each snubber to accommodate specific application needs
  • Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
  • Exotic materials or intermediate disc grades available
  • Provides long service life with no moving parts to wear out
  • Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2

Seal & Pressure Transmitter/Switch Assembly For Wastewater, Chemical Feed

 N/A The NOSHOK All Non-Metallic Diaphragm Seal & Pressure Transmitter/Switch assembly is ideal for water, wastewater & chemical feed applications.

Steam Syphons

 N/A
  • Protect the instrument from the damaging effects of high temperature steam
  • Recommended for use in all steam applications
  • Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF

Swivel Adapters

 N/A
  • Temperature ratings: 15,000 psi at 200 ºF and 3,000 psi at 1,000 ºF
  • Used with gauges and gauge valves to adjust the line of sight
  • Rotates 360º to allow the connected instrument to be positioned in the desired direction
  • The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
  • All 316 Stainless Steel construction
  • Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
  • Also available with 1/4" NPT connections, same specifications apply
  • Weight approximately 0.8 lb.