Stock |
N/A Yes |
Type |
N/A Low Pressure Gauge |
Series |
N/A 200 |
Connection Type |
N/A National Pipe Thread (NPT) |
Full Scale Accuracy (±) |
N/A 1.6 % |
Connection Size |
N/A 1/4 in |
Lens/Display Material |
N/A Acrylic |
Gauge Size |
N/A 2-1/2 in |
Connection Location |
N/A Back |
Dial |
N/A Aluminum, white background with black scale. UV resistant. |
Case Type |
N/A Steel, Back Connection |
Pressure Range |
N/A 0 to 10 inH2O |
Case Material |
N/A Black Painted Steel |
Connection Material |
N/A Brass |
Pointer |
N/A Black Finished Aluminum |
Movement |
N/A Brass and Nickel-Silver with Highly Polished Bearing Surfaces |
Warranty |
N/A 1 yr |
Related Items |
N/A
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve |
Media Temperature Range |
N/A -4 to 176 ºF-20 to 80 ºC |
Ambient Temperature Range |
N/A -4 to 140 ºF-20 to 60 ºC |
Prop 65 Warnings |
N/A
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
|
Application |
N/A
|
Working Pressure Limitations |
N/A
Dynamic Pressure The working pressure should be limited to 60% of the dial range Static Pressure The working pressure, where no sharp fluctuations occur, should be limited to 90% of the dial range |
Limitations Which Apply Are |
N/A
|
Caution |
N/A
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017. In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice. |
Installed Options and Accessories |
N/A
Available
|
Uninstalled Options and Accessories |
N/A
|
Assembly Options |
N/A NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution. |
Diaphragm Seals |
N/A NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media. |
Distribution Manifolds |
N/A NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths. |
Metric Dials and Customized Special Dials |
N/A
|
Pressure Snubbers - Piston Type |
N/A
|
Pressure Snubbers - Sintered Type |
N/A
|
Steam Syphons |
N/A
|
Swivel Adapters |
N/A
|