NOSHOK, INC.
NOSHOK, INC.
1010 W. Bagley Road
Berea, OH 44017
Phone: 440.243.0888
Fax: 440.243.3472
Website: www.noshok.com
Print Back
  • Highly accurate dry gauge
  • Vacuum and compound ranges through 0 psi to 6,000 psi
  • Beryllium Copper, 316 Stainless Steel, and Brass wetted parts
  • Cleaning for Oxygen Service (O2) is available only for dry or HL (Halocarbon) filled gauges
Unit of Measure

Specifications

Stock

 N/A Yes

Type

 N/A Pressure Gauge

Series

 N/A 800

Connection Type

 N/A National Pipe Thread (NPT)

Cover Ring Material

 N/A 304 Stainless Steel

Full Scale Accuracy (±)

 N/A 0.25 %

Connection Size

 N/A 1/4 in

Lens

 N/A Instrument Glass

Dial

 N/A Aluminum, white mirrored background with black scale.

Gauge Size

 N/A 6 in

Connection Location

 N/A Bottom

Scale Option

 N/A psi Single Scale

Case Material

 N/A 304 Stainless Steel

Measuring Element

 N/A Beryllium copper Bourdon tube to 1,000 psi, 316 SS Bourdon tube 1,500 psi to 6,000 psi

Connection Material

 N/A Brass

Case Type

 N/A Stainless Steel (SS) Case, Bottom Connection
Media Temperature Range1 N/A -40 to 180 ºF-40 to 80 ºC
Ambient Temperature Range2 N/A -40 to 140 ºF-40 to 60 ºC

Pressure Range

 N/A 0 to 30 psig

Pointer

 N/A Adjustable Knife-Edge Pointer

Movement

 N/A Brass with jeweled bearings nickel-silver pinion gear and shafts

Figure Primary Scale Pressure

 N/A 2 psi

Graduation Primary Scale Pressure

 N/A 0.1 psi

Warranty

 N/A 1 yr

Related Items

 N/A 204-MFS, 1/2" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.187" Orifice Hard Seat Multiport Valve
2070-MFS, 1/2" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, Hard Seat, 0.187" Orifice Block and Bleed 2-Valve
404-MFS, 1/2" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, Hard Seat, 0.187" Orifice Needle Valve
704-MFS, 1/2" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, Soft Seat, 0.187" Orifice Block and Bleed Valve

Application

Application

 N/A
  • Aerospace equipment
  • Gauge repair facilities
  • Laboratory & test equipment
  • Precision measurement

Working Pressure Limitations

Working Pressure Limitations

 N/A Static Pressure

The working pressure, where no sharp fluctuations occur, should be limited to 100% of the dial range.

NOTE: 800 Series Precision Test gauges are not intended for dynamic applications.

Prop 65 Warnings

Prop 65 Warnings

 N/A
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Caution

Caution

 N/A Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.

In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.

Limitations Which Apply Are

Limitations Which Apply Are

 N/A
  • Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
  • The pressure gauges must be operated within the following working pressure limits:
    • Dynamic Pressure application, 60% of the dial range
    • Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
  • The gauges must be operated within specified ambient temperature ranges
  • Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.

Options and Accessories

Installed Options and Accessories

 N/A Available
  • 10-32-UNF-2B (10-32)
  • Orifice - 316SS Threaded 0.8 mm (ST8) - Standard
  • Orifice - 316SS Threaded 0.5 mm (ST5)
  • Laser Marking (LM)
  • Stainless Steel Tagging (ST)
Certificates
  • Certified Calibration (CC), Vacuum through 15,000 psi
  • Cleaning for Oxygen Service (O2), Up to 1,000 psi
  • Cleaning for Oxygen Service (O2), 1,500 psi and up

Uninstalled Options and Accessories

 N/A
  • Certificate of Cleaning (COCL)
  • Certificate of Conformance (COC)

Assembly Options

 N/A NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.

Diaphragm Seals

 N/A NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.

Distribution Manifolds

 N/A NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.

Metric Dials and Customized Special Dials

 N/A
  • Dual scale metric dials in psi/bar, psi/kPa and psi/kg/cm2
  • Other scales are available for specific sizes and ranges, such as single scale bar and kPa, refrigerant scales and altitude scales
  • Customized special dials such as non-standard metric scale, tons of ram, lbs. of force, etc. are available in small quantities (as few as one piece) on some NOSHOK gauges
Please consult the factory for availability.

Pressure Snubbers - Piston Type

 N/A
  • Resist clogging and are self-cleaning
  • Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
  • Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
  • Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"​​​​​​

Pressure Snubbers - Sintered Type

 N/A
  • Cost effective solution to protect expensive instrumentation
  • Increases gauge readability by smoothing out pressure surges, pulsations and spikes
  • 5 basic elements available for each snubber to accommodate specific application needs
  • Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
  • Exotic materials or intermediate disc grades available
  • Provides long service life with no moving parts to wear out
  • Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2

Steam Syphons

 N/A
  • Protect the instrument from the damaging effects of high temperature steam
  • Recommended for use in all steam applications
  • Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF
  • 1 For every 18 ºF (10 ºC) shift in temperature from which the gauge is calibrated, the user can experience up to ±0.4% additional error.
  • 2 For every 18 ºF (10 ºC) shift in temperature from which the gauge is calibrated, the user can experience up to ±0.4% additional error.