Type |
N/A Needle Valve |
Weight |
N/A 0.5 lb |
Warranty |
N/A 3 yr |
Series |
N/A 150 |
Connection Size |
N/A 1/4 in |
Valve Type |
N/A Male-Female Angle |
Valve Material |
N/A Steel |
Material |
N/A Male-Female Angle, Steel |
Stem Seal and Type |
N/A All 316 Stainless Steel stems with Fluorocarbon (FKM) o-ring and Polytetrafluoroethylene (PTFE) back-up ring below the threads, Polytetrafluoroethylene (PTFE) packing optional |
Pressure Ratings at 200 Degree Fahrenheit (ºF) Temperature |
N/A 6,000 psi |
Orifice Size |
N/A 0.172 in |
Cv Coefficient |
N/A 0.42 |
Seat |
N/A Hard Seat |
Handle Material |
N/A Steel |
Optional Handle Material |
N/A Steel |
Connection Type |
N/A National Pipe Thread (NPT) |
Additional Information |
N/A
|
Prop 65 Warnings |
N/A
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
|
Limitations Which Apply Are |
N/A
These units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation. In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice. |
Additional Options |
N/A
|
Installed Options and Accessories |
N/A
|
Assembly Options |
N/A NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution. |
Note |
N/A
All NOSHOK valve products conform to the MSS SP-99 instrument valves standards, and valves supplied with packing also conform to MSS SP-132 compression packing systems for instrument valves standard. Please note that the standard o-ring in all the NOSHOK mini valves is FKM and the standard handles are brass round knurled handles (HL3), steel 1-3/8" mini "T" handles (HL7), and 316SS 1-3/8" mini "T" handles (HL7) The handle material will always match the material of the valve, unless otherwise specified. For example, the round knurled handles (HL3) on a 152-FFB will be brass. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests. O-Ring - Other o-ring materials available on request. |