Print Back
  • Easy programming and range adjustment without test pressure via on-board display
  • 4:1 turn down
  • Active temperature compensation
  • Hart® protocol output available
  • All Stainless Steel housing and wetted parts
Unit of Measure

Specifications

Type

N/A Pressure and Level Transmitter

Tri-Clamp Size

N/A 2 in

Weight

N/A 2.2 lb

Full Scale Best Fit Straight Line (BFSL) Accuracy (±)

N/A 0.2 % of adjusted span %

Storage Temperature [Min]

N/A -20 ºC-4 ºF

Storage Temperature [Max]

N/A 100 ºC212 ºF

Housing Material

N/A 304 Stainless Steel, 316 Stainless Steel

Output Signal

N/A 4 mA to 20 mA 2-wire, 4 mA to 20 mA 2-wire and Hart® signal

Electrical Connection

N/A PG9 Cable Gland

Environmental Rating

N/A Ingress Protection (IP66) (National Electrical Manufacturers Association (NEMA) 4X), Ingress Protection (IP68) (National Electrical Manufacturers Association (NEMA) 6) optional

Series

N/A 25

Connection Material

N/A 316 Stainless Steel

Pressure Range

N/A 29 to 145 psig0 to 803 inH2O0 to 4017 inH2O

Stability

N/A < 0.1%/year

Adjustment

N/A By 3 push buttons on display or optional Hart® signal

Response Time

N/A <100 ms

Service Life

N/A <10 yr

Measuring Element

N/A 316 Stainless Steel (Hastelloy C or Tantalum optional)

Limitations Which Apply Are

Limitations Which Apply Are

N/A These units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.

In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.

Additional Information

Additional Information

N/A
  • Strong flush diaphragm with minimal fill volume
  • Can be cleaned-in-place (CIP) or steamed-in-place (SIP)
  • 3A Certified

Options and Accessories

Options

N/A Transparent Cover (for Display) (TC)

Digital Indicators

N/A NOSHOK Digital Indicators provide local indication for pressure, level and temperature transmitters.

Sanitary Clamps and Gaskets

N/A
  • Clamp-style fittings are constructed of T304 Stainless Steel; T316 Stainless Steel on request
  • Double hinge design for easy installation and removal
  • Available in sizes from 3/4" to 4"
  • Standard pressure rating of 500 psi at 70 ºF (21 ºC); up to 3,000 psi rating on request
  • Clamp gaskets are available in NBR, EPDM, PTFE and FKM
  • All clamps and gaskets meet FDA and 3A sanitary standards
ASME-BPE Sanitary Clamp
1-1/2" (CR 12)
2" (CR 16)
2-1/2" (CR 20)
3" (CR 24)

NBR Gasket
1-1/2" (BG 12)
2" (BG 16)
2-1/2" (BG 20)
3" (BG 24)

PTFE Gasket
1-1/2" (TG 12)
2" (TG 16)
2-1/2" (TG 20)
3" (TG 24)

Prop 65 Warnings

Prop 65 Warnings

N/A
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov