About
- These compressed air dryers are intended for instrumentation, laboratory applications and other low-flow uses that require extremely dry or oil-free air
- Removes contaminants in vapor form, which cannot be removed by filtration
- The type of application should be specified as to whether dew point reduction (water vapor) or the removal of oil vapor is required
Featured Specifications
Pressure [Max]
150 psi
Connection Size
45659 in
Housing Material
Aluminum
Drain Type
Manual Drain
1716-Series-Melt-Guard-Visi-Guard-Desiccant-Dryer-12-SCFM-Without-Sump.pdf 
Product Specifications
▲| Type | Metl-Guard/Visi-Guard Desiccant Dryer |
| Series | Visi-Guard and Metl-Guard Desiccant Dryer 12 scfm |
| Drain Type | Manual Drain |
| Efficiency | With SG-1 Desiccant, Water Vapor (-50ºF/-45ºC Dew Point) |
| Pressure [Max] | 150 psi |
| Rated Flow at 100 psig | 12 scfm |
| Rated Flow at 7 kg/cm² | 340 L/min |
| Rated Flow at 7 bar | 20 m³/h |
| Connection Size | 45659 in |
| Connection Type | National Pipe Thread (NPT) |
| Filter Type | Desiccant Bed |
| Housing Material | Aluminum |
| Weight | 15 lb |
Options and Accessories
▲| Options and Accessories | SG-1 Desiccant (KE1730) |
Warnings
▲| Prop 65 Warnings | ⚠️ WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Applications
▲| Applications | Used for applications that require extremely dry or oil free air |
Applications
▲| Application | Used for applications that require extremely dry or oil free air |