MENU
NOSHOK'S COVID-19 Response
Request Information
  • Rugged, electronic gauge
  • Compound and standard ranges through 0 psig to 10,000 psig
  • Stainless Steel wetted parts
  • CE compliant to suppress RFI, EMI and ESD
Unit of Measure

Specifications

Type

 N/A Digital Pressure Gauge

Series

 N/A 1000

Connection Type

 N/A Male National Pipe Thread (MNPT)

Case Material

 N/A Stainless Steel

Storage Temperature [Min]

 N/A -20 ºC-4 ºF

Storage Temperature [Max]

 N/A 70 ºC158 ºF

Connection Size

 N/A 1/4 in

Display

 N/A Liquid Crystal Display with 0.43" digits, 4 digits up to 9999 with bar graph

Connection Material

 N/A 316 Stainless Steel

Gauge Size

 N/A 3.31 in

Rotatable Base Angle

 N/A 300 º

Compensated Temperature Range

 N/A 32 to 140 ºF0 to 60 ºC

Media Temperature Range

 N/A -22 to 185 ºF-30 to 85 ºC

Ambient Temperature Range

 N/A 14 to 140 ºF-10 to 60 ºC

Note for Temperature Range

 N/A Effect ±0.15 % per 10K at zero and span, Span effect is ±0.005 % full scale/ºF

Pressure Range

 N/A 0 to 10,000 psig

Measuring Element

 N/A Stainless Steel, Thin-Film Measuring Element

Triangular Bezel Material

 N/A Stainless Steel
Power Requirement1 N/A 2 x 1.5V "AA" Battery, 4,000 hrs ("AA" 2,000 mAh)

Response Time

 N/A 200 ms
Proof Pressure [Max]2 N/A 15,000 psi

Programmable Functions

 N/A Adjustable Through Front Key Pad

Measuring Units

 N/A Bar, Psi, MPa

Peak Memory

 N/A Min/Max, Display, Hold

Environmental Rating

 N/A Ingress Protection (IP65)

Terminal Point Accuracy (±)

 N/A 0.5 %

Digit Accuracy (±)

 N/A 1 %

Weight

 N/A 0.88 lb

Electromagnetic Rating

 N/A European Conformity (CE) Compliant to Electromagnetic Compatibility (EMC) Norm European Standards (EN) 61326:2014/A1:1998, Radio Frequency Interference (RFI), Electromagnetic Interference (EMI) and Electrostatic Discharge (ESD) Protection

Warranty

 N/A 3 yr

Options and Accessories

 N/A Peak Memory - Standard, Gauge Carrying Case

Related Items

 N/A , 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve
, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve

Features

Enhanced Software Features

 N/A
  • Tare function
  • Password protection
  • Min./max. memory
  • Internal lighting

Application

Application

 N/A
  • Hydraulics & pneumatics
  • Laboratory & test equipment
  • Leak detection
  • Power generation
  • Water management

Prop 65 Warnings

Prop 65 Warnings

 N/A
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Caution

Caution

 N/A Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.

In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.

Limitations Which Apply Are

Limitations Which Apply Are

 N/A
  • Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
  • The pressure gauges must be operated within the following working pressure limits:
    • Dynamic Pressure application, 60% of the dial range
    • Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
  • The gauges must be operated within specified ambient temperature ranges
  • Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.

Options and Accessories

Installed Options and Accessories

 N/A
  • Peak Memory (1) - Standard
  • Enhanced Software (6) Includes: Tare Function, Password Protection, Min/Max Memory, Internal Lighting & Rotatable Base
  • SS Threaded Orifice (ST8)
  • Rubber Case Protector (RCP)
  • Gauge Carrying Case (GC)

Assembly Options

 N/A NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.

Diaphragm Seals

 N/A NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.

Distribution Manifolds

 N/A NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.

Pressure Snubbers - Piston Type

 N/A
  • Resist clogging and are self-cleaning
  • Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
  • Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
  • Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"​​​​​​

Pressure Snubbers - Sintered Type

 N/A
  • Cost effective solution to protect expensive instrumentation
  • Increases gauge readability by smoothing out pressure surges, pulsations and spikes
  • 5 basic elements available for each snubber to accommodate specific application needs
  • Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
  • Exotic materials or intermediate disc grades available
  • Provides long service life with no moving parts to wear out
  • Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2

Steam Syphons

 N/A
  • Protect the instrument from the damaging effects of high temperature steam
  • Recommended for use in all steam applications
  • Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF

Note

Note

 N/A Standard model will only display 9,999 psig
  • 1 Unregulated
  • 2 2 times full scale range