Use PT Series Part Number Crossover Tool to convert from 100, 200, 300 and 615 Series transmitters to new PT Series transmitters.
Use PT Series Part Number Crossover Tool to convert from 100, 200, 300 and 615 Series transmitters to new PT Series transmitters.
Type |
N/A Digital Pressure Gauge |
Series |
N/A 1000 |
Connection Type |
N/A Male National Pipe Thread (MNPT) |
Case Material |
N/A Stainless Steel |
Storage Temperature [Min] |
N/A -20 ºC-4 ºF |
Storage Temperature [Max] |
N/A 70 ºC158 ºF |
Connection Size |
N/A 1/4 in |
Display |
N/A Liquid Crystal Display with 0.43" digits, 4 digits up to 9999 with bar graph |
Connection Material |
N/A 316 Stainless Steel |
Gauge Size |
N/A 3.31 in |
Rotatable Base Angle |
N/A 300 º |
Compensated Temperature Range |
N/A 32 to 140 ºF0 to 60 ºC |
Media Temperature Range |
N/A -22 to 185 ºF-30 to 85 ºC |
Ambient Temperature Range |
N/A 14 to 140 ºF-10 to 60 ºC |
Note for Temperature Range |
N/A Effect ±0.15 % per 10K at zero and span, Span effect is ±0.005 % full scale/ºF |
Pressure Range |
N/A 0 to 300 psig |
Measuring Element |
N/A Stainless Steel, Thin-Film Measuring Element |
Triangular Bezel Material |
N/A Stainless Steel |
Power Requirement1 | N/A 2 x 1.5V "AA" Battery, 4,000 hrs ("AA" 2,000 mAh) |
Response Time |
N/A 200 ms |
Proof Pressure [Max]2 | N/A 15,000 psi |
Programmable Functions |
N/A Adjustable Through Front Key Pad |
Measuring Units |
N/A Bar, Psi, MPa |
Peak Memory |
N/A Min/Max, Display, Hold |
Environmental Rating |
N/A Ingress Protection (IP65) |
Terminal Point Accuracy (±) |
N/A 0.5 % |
Digit Accuracy (±) |
N/A 1 % |
Weight |
N/A 0.88 lb |
Electromagnetic Rating |
N/A European Conformity (CE) Compliant to Electromagnetic Compatibility (EMC) Norm European Standards (EN) 61326:2014/A1:1998, Radio Frequency Interference (RFI), Electromagnetic Interference (EMI) and Electrostatic Discharge (ESD) Protection |
Warranty |
N/A 3 yr |
Options and Accessories |
N/A Peak Memory - Standard |
Related Items |
N/A
102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve |
Enhanced Software Features |
N/A
|
Application |
N/A
|
Prop 65 Warnings |
N/A
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
|
Caution |
N/A
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017. In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice. |
Limitations Which Apply Are |
N/A
|
Installed Options and Accessories |
N/A
|
Assembly Options |
N/A NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution. |
Diaphragm Seals |
N/A NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media. |
Distribution Manifolds |
N/A NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths. |
Pressure Snubbers - Piston Type |
N/A
|
Pressure Snubbers - Sintered Type |
N/A
|
Steam Syphons |
N/A
|