MENU
NOSHOK'S COVID-19 Response
  • Multiport design reduces the number of gauge and other instrument connections to permanent piping installations, decreasing possible leak paths
  • Optional bleed plugs further allow pressure to be bled off without disturbing the permanent piping installation
  • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
Unit of Measure

Specifications

Type

N/A Needle Valve

Series

N/A 200

Material

N/A Zinc-Nickel Plated Steel

Stem Seal and Type

N/A All 316 Stainless Steel stems with Fluorocarbon (FKM) o-ring and Polytetrafluoroethylene (PTFE) back-up ring below the threads, Polytetrafluoroethylene (PTFE) or Graphite packing optional

Pressure Ratings at 200 Degree Fahrenheit (ºF) Temperature

N/A 10,000 psi

Weight

N/A 2.2 lb

Orifice Size

N/A 0.187 in

Cv Coefficient

N/A 0.44

Connection Size

N/A 1/2 in

Seat

N/A Hard Seat

Valve Material

N/A Stainless Steel

Warranty

N/A 3 yr

Connection Type

N/A Male National Pipe Thread (MNPT) x Female National Pipe Thread (FNPT)

Related Items

N/A , 1/2" National Pipe Thread (NPT), Male, 316 Stainless Steel, Hard Seat 0.159" Bleed Port Valve
, 1/2" National Pipe Thread (NPT) Stainless Steel Bleed Plug
, 1/2" National Pipe Thread (NPT) Stainless Steel Plug

Prop 65 Warnings

Prop 65 Warnings

N/A
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Additional Options

Additional Options

N/A
  • Stem Tips
    • Non-rotating (316 stainless) (T1 )
    • Ball (440C stainless) (T5)
    • Ball (carbide) (T6)
    • Ball (Monel) (T8)
    • Non-rotating regulating (316 Stainless) (T9)
  • O-Rings
    • EPDM (EM1)
    • FFKM (Perfluoroelastomer 3018 or equivalent) (KZ1)
    • NBR (NB1)
  • Panel Mountings
    • Panel mount (1 nut) (PM1)
    • Panel mount (2 nuts) (PM2)
  • Handles
    • 1-13/16" Mini "T" (HL1)
    • 1-3/8" Phenolic (HL4)
    • 1-3/4" Phenolic (HL5 )

Additional Information

Additional Information

N/A
  • Blow-out proof stem provides a secondary stem seal in the full open position
  • All stem threads are rolled for strength and ease of operation
  • One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
  • Slotted spring pin to prevent accidental loosening
  • Vinyl dust cap for bonnet and stem (non-packing)

Options and Accessories

Installed Options and Accessories

N/A
  • Packing (If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the Pressure vs. Temperature: Packing Style with Compatible Fluid chart Options Reference Chart)
    • PTFE (P1)
    • Graphite (P2)
    • Non-rotating (316 Stainless Steel) (T1)
    • Ball, 440C Stainless Steel (T5)
    • Ball, carbide (T6)
    • Ball, ceramic (T7)
    • Ball, Monel (T8)
    • Non-rotating regulating, 316 Stainless Steel (T9)
  • O-Rings (Other o-ring materials available on request)
    • EPDM (EM1)
    • FFKM (Perfluoroelastomer) 3018 or equivalent (KZ1)
    • NBR (NB1)
  • Panel Mount
    • 1 nut (PM1)
    • 2 nuts (PM2)
  • Handles
    • 1-13/16" Mini T-Handle (HL1)
    • 1-3/8" Phenolic Handle (HL4)
    • 1-3/4" Phenolic Handle (HL5)
  • Cleaning For Oxygen Service (Stainless Steel Only)

Assembly Options

N/A NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.

Uninstalled Options and Accessories

N/A
  • Plug, Steel (PG1-CS1-ZN1)
  • Plug, Stainless Steel (PG1-SS1-EP)
  • Bleed Plug, Steel, 1/2" NPT (BP1-C)
  • Bleed Plug, Stainless Steel, 1/2" NPT (BP1-S)
  • Bleed Plug, Stainless Steel, 1/4" NPT (BP2-S)

Assembly Option for Indication, Output, and Isolation/Bleed

N/A NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.

For example, you can simplify your system with this easy-to-install solution from NOSHOK. Three simple components that require a single threaded connection in your piping system will provide local indication, analog output and block/isolate with bleed function. This product grouping is an ideal solution for a variety of applications including oil and gas, and is available in several high pressure ranges, including 5,000, 10,000 and 15,000 psi. Special design for Shale Gas applications.

This example represents a general solution; however, we offer a diverse range of gauges, transmitters and valves which are available with a variety of connection options and ranges to suit your needs. (Photo shows 40-400 Series Pressure Gauge (Local Indication), 621 Series Pressure Transmitter (Control Output), and 200 Series Multi-Port Valve (Block/Isolate & Bleed).

Bleed Valve

N/A Bleed valves provide a convenient means to relieve process pressures trapped between a shut off valve and the instrument.

Note

Note

N/A Plugs and bleed plugs are available and can be ordered separately.

Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are "T" handles (HL2).

The handle material will always match the material of the valve, unless otherwise specified. For example, the "T" handle (HL2) on the 204-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests

All NOSHOK valve products conform to the MSS SP-99 instrument valves standards, and valves supplied with packing also conform to MSS SP-132 compression packing systems for instrument valves standard.

Other o-ring materials available on request.