MENU
NOSHOK'S COVID-19 Response
  • Heavy-duty, industrial thermometer featuring a weather-resistant, tamper-proof case
  • ± 1-3/4", 2", 3" and 5" sizes - center back connection only
  • Highly sensitive bimetallic helix coil is heat-treated for stress relief, and silicone-coated to minimize pointer vibration and maximize heat transfer and response time
  • 360º groove around stem is a visual reference to show minimum immersion point
  • Made in the U.S.A.
Unit of Measure

Specifications

Type

N/A Bimetal Thermometer

Series

N/A 100

Case and Bezel Material

N/A 304 Stainless Steel

Temperature Range [Min]

N/A 150 ºF

Temperature Range [Max]

N/A 750 ºF

Full Scale Accuracy (±)

N/A 1.0 %

Accuracy Grade

N/A A

Accuracy Standard

N/A American Society of Mechanical Engineers (ASME) B40.3

Connection Size

N/A 1/4 in

Lens

N/A Instrument Glass

Dial Size

N/A 2 in

Case Type

N/A Back Connection

Temperature Scale

N/A Dual

Connection Type

N/A National Pipe Thread (NPT)

Pointer

N/A Aluminum, Black Finished

Dial

N/A Anodized Aluminum with large black numbers and graduations

Wetted Parts Material

N/A 304 Stainless Steel

Optional Wetted Parts Material

N/A 316 Stainless Steel

Optional Case and Bezel Material

N/A 316 Stainless Steel

Hermetic Seal

N/A Per American Society of Mechanical Engineers (ASME) B40.3 dustproof and leakproof

Bimetal Coil

N/A Silicone coated helix coil on ranges below 500 ºF for vibration dampening, maximum heat transfer and response time

Warranty

N/A 1 yr

Limits Over Temperature at 100 Percentage

N/A Up to 250 ºF

Limits Over Temperature at 50 Percentage

N/A 250 to 500 ºF

Limits Over Temperature at Continuous Use Up to 800 ºF

N/A 550 to 1,000 ºF

Limits Over Temperature at Intermittent Use Over 800 ºF

N/A 550 to 1,000 ºF

Stem Lengths

N/A 2.5 in

Stem Diameter

N/A 0.250 in6.35 mm

Stock

N/A Yes

Application

Application

N/A
  • Used in almost every area of manufacturing, especially suited for applications in the following areas:
    • Industrial process
    • Petrochemical
    • Food & beverage processing
    • Commercial
    • Wastewater

Options and Accessories

Options and Accessories

N/A
  • Certificate of Conformance
  • Mounting Brackets - Consult Factory
  • Stainless Steel Tagging (ST)
  • Tempered Glass Lens

100 Series Bimetal Thermometer Silicone Filled (SL)

N/A
  • Available for 20-110, 30-110 and 50-110 models only
  • Available only for ranges from -50 ºF (-45 ºC) to 500 ºF (260 ºC)
  • For applications where severe vibration may be a factor
  • Silicone dampens and lubricates the internal mechanism thus reducing pointer oscillation and premature wear
  • Maximum case temperature not to exceed 300 ºF (150 ºC)
  • Polycarbonate lens is standard with Silicone Fill

Mounting Flanges - Bimetal Thermometers

N/A Various sizes and types of mounting flanges are available

Special Dials - Bimetal Thermometers

N/A Special ranges and dials with company names, company logos, part numbers, telephone numbers, or almost any custom layout is available

Certified Calibration

N/A
  • Certified calibration provides the user with a serial numbered thermometer along with a calibration sheet against a primary temperature standard
  • Traceable to the National Institute of Standards and Technology

Stem Types

N/A
  • The 304 Series Stainless Steel stem is welded at the tip and case for hermetic seal
  • 1/4" (6.35 mm) diameter is standard for lengths up to 24" (609 mm)
  • 3/8" diameter, sharp tip options and optional 316SS wetted parts are also available

Thermowells

N/A Thermowells allow a temperature instrument to be removed and replaced without shutting down and draining the process, and reduce the possibility of damage to the temperature instrument.

Prop 65 Warnings

Prop 65 Warnings

N/A
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Limitations Which Apply Are

Limitations Which Apply Are

N/A These units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.

In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.

Note

Note

N/A Thermowells are recommended for pressure, corrosive fluids and high velocity applications.