About
Pressure Transmitter, 0 psig to 500 psig, 0.25% Accuracy (BFSL), 4 mA to 20 mA Output, 1/4 NPT Male, M12 x 1 (4-Pin), 0.8 mm Threaded Orifice
Featured Specifications
Pressure Range
0 to 500 psig
Accuracy
±0.25% full scale (BFSL)
Output Signal
4 mA to 20 mA, 2-wire
Process Connection
1/4" NPT Male
Electrical Connection
M12 x 1 (4-Pin)
Assets
Dimensions 
Data Sheet 
Wiring Diagram 
Product Specifications
▲| Product Series | Micro-Size Transducer |
| Electromagnetic Rating | European Conformity (CE) Compliant to Electromagnetic Compatibility (EMC) Norm European Standards (EN) 61326, Radio Frequency Interference (RFI), Electromagnetic Interference (EMI) and Electrostatic Discharge (ESD) Protection |
| Storage Temperature (Min.) | -40 ºF
-40 ºC |
| Storage Temperature (Max.) | 212 ºF
100 ºC |
| Housing Material | 316 Stainless Steel |
| Output Signal | 4 mA to 20 mA, 2-wire |
| Process Connection | 1/4" NPT Male |
| Electrical Connection | M12 x 1 (4-Pin) |
| Power Requirement | 10 Vdc to 36 Vdc |
| Pressure Range | 0 to 500 psig |
| Stability | ≤±0.2% full scale for 1 year, non-accumulating |
| Service Life | > 100,000,000 Load Cycles |
| Compensated Temperature Range | -4 to 185 ºF
-20 to 85 ºC |
| Note for Compensated Temperature Range | Zero effect ± 0.01% full scale/ºF Span effect ± 0.01% full scale/ºF |
| Media Temperature Range |
|
| Ambient Temperature Range | -4 to 185 ºF
-25 to 85 ºC |
| Load Limitations | ≤(VPower-10)/0.020 Amp for 4 mA to 20 mA ≥10,000 Ω for 0 Vdc to 10 Vdc, 3-wire ≥5,000 Ω for 0 Vdc to 5 Vdc, 3-wire |
| Proof Pressure | 2 Times Full Scale |
| Burst Pressure | 9 Times Full Scale |
| Measuring Element | 17-4PH Stainless Steel |
| Connection Material | 316 Stainless Steel |
| Environmental Rating | IP65 |
| Electrical Protection | Reverse polarity, over-voltage and short circuit protection |
| Shock According to International Electrotechnical Commission (IEC) 60068-2-27 | 1,000 g |
| Vibration According to International Electrotechnical Commission (IEC) 60068-2-6 | 20 g |
| Approximate Weight (oz) | 1.75 oz |
| Warranty | 3 yr |
| Standard Orifice | 1 mm |
| Response Time | <2 ms (between 10% and 90% full scale); restrictor port I.D. to dampen pulsations |
| Related Items |
|
Applications
▲| Applications |
|
| Additional Information |
|
| Assembly Options | NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution. |
| Diaphragm Seals | NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media. |
| Digital Indicators | NOSHOK Digital Indicators provide local indication for pressure, level and temperature transmitters. |
| Distribution Manifolds | NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths. |
| Pressure Snubbers - Piston Type |
|
| Pressure Snubbers - Sintered Type |
|
| Steam Syphons |
|
| Swivel Adapters |
|
Applications
▲| Application |
|
Limitations Which Apply Are
▲| Limitations Which Apply Are | These units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation. In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice. |
Prop 65 Warnings
▲| Prop 65 Warnings | ⚠️ WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |