About
Intelligent Indicating Transmitter/Switch, 0 psig to 200 psig, ±0.5% Accuracy (BFSL), 1 N.O. or N.C. switch (PNP/NPN) with 4 mA to 20 mA/0 Vdc to 10 Vdc, 4 mA to 20 mA or 0 Vdc to 10 Vdc Output, 1/4" NPT male, M12 x 1 (4-pin), With IO-Link
Featured Specifications
Accuracy
±0.5% of span (BFSL)
Switch Adjustable Range
.25 to 100% of full scale
Process Connection
1/4" NPT Male
Electrical Connection
M12 x 1 (4-pin)
Assets
Dimensions 
Data Sheet 
Product Specifications|Output Parameters|Switch Parameters|Accuracy Parameters|Applications|Limitations Which Apply Are|Prop 65 Warnings
Product Specifications
▲| Pressure Range | 0 psig to 200 psig |
| Display | 14 segment-LED, red 4-digit, height 0.35" |
| Service Life | 100,000,000 load cycles |
| Ambient Temperature Range | -4 to 176 ºF
-20 to 80 ºC |
| Compensated Temperature Range | 32 to 176 ºF
0 to 80 ºC |
| Media Temperature Range | -4 to 185 ºF
-20 to 85 ºC |
| Current Consumption | Max. 70 mA (with 4-20 mA output signal); Total max. 600 mA including switching current |
| Proof Pressure | 2 times full scale |
| Measuring Element | 316L, PH grade Stainless Steel |
| Housing Material | 304 Stainless Steel |
| Connection | 316 Stainless Steel |
| Materials of Construction (Wetted Parts) | 316L, PH grade Stainless Steel |
| Environmental Rating | IP65 and IP67 per IEC 60529 |
| Electromagnetic Rating | RFI, EMI and ESD protection |
| Electrical Protection | Protected against reverse polarity, over-voltage and short circuit |
| Shock | 50 g |
| Vibration | 20 g |
| Weight | 0.49 lb |
Output Parameters
▲| Output Number | 1 |
| Output Function | N.O. or N.C. |
| Switching Current | 250 mA max. |
| Switching Voltage | Power Supply - 1 V |
| Switch On Time | 1 s |
| Response Time | <5 ms |
| Adjustment | Freely scalable within the range of 5:1 |
Switch Parameters
▲| Switch Adjustable Range | .25 to 100% of full scale |
| Switch Point | .25 to 100% of full scale |
| Switch Type | PNP or NPN Electronic Switch |
| Switching Function | N.O., N.C., window, hysteresis (freely adjustable) |
| Switching Number | 1 |
| Hysteresis | Fully adjustable |
| Non-Repeatability | <0.1% of span (IEC 61298-2) |
| Contact Rating | 250 mA max. |
Accuracy Parameters
▲| Accuracy | ±0.5% of span (BFSL) |
| Note for Accuracy | Transmitter accuracy: includes non-linearity, hysteresis, zero offset and end value deviation (corresponds to measured error per IEC 61298-2). Switch accuracy: ≤0.5% of span. Non-repeatability: <0.1% of span (IEC 61298-2). |
Applications
▲| Application |
|
Limitations Which Apply Are
▲| Limitations Which Apply Are | These units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice. |
Prop 65 Warnings
▲| Prop 65 Warnings | ⚠️ WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |