Convert to PT Series
NEW
Use PT Series Part Number Crossover Tool to convert from 100, 200, 300 and 615 Series transmitters to new PT Series transmitters.
| Items |
 900--330/1100-1-C1-48-48-045-1 ±0.12% Accuracy @ 0 ºC, Class B PT100 2-Wire, 1/2" National Pipe Thread (NPT) Sliding Compression Fitting, M12 x 1 (5 Pin) 4.5" Stem, 2.5" Immersion, 1/8" Diameter Industrial Resistance Temperature Device (RTD) Probe |
900--50/400-1-C2-8-36-0075-1 PT100 3-Wire 1/2" National Pipe Thread (NPT), 0.75" Stem 1/8" Diameter Industrial Resistance Temperature Device (RTD) Probe with 36" Integral Cable |
900--50/400-1-C2-8-37-025-2 PT100 3-Wire 1/2" National Pipe Thread (NPT) 2.5" Stem 1/4" Diameter Industrial Resistance Temperature Device (RTD) Probe |
900--50/400-1-C2-8-37-040-2 PT100 3-Wire 1/2" National Pipe Thread (NPT) 4" Stem 1/4" Diameter Industrial Resistance Temperature Device (RTD) Probe |
900--50/400-1-C2-8-37-060-2 PT100 3-Wire 1/2" National Pipe Thread (NPT) 6" Stem 1/4" Diameter Industrial Resistance Temperature Device (RTD) Probe |
|||||
| Description |
|
|||||||||
| Type | Probe | |||||||||
| Series | 900 | |||||||||
| Connection Type | Male National Pipe Thread (MNPT) with sliding compression fitting - Add 2" to stem length for this option. If installing with thermowells, Process Connection option 48 or 61 must be selected | Male National Pipe Thread (MNPT) | Male National Pipe Thread (MNPT) | Male National Pipe Thread (MNPT) | Male National Pipe Thread (MNPT) | |||||
| Wetted Materials | 316 Stainless Steel | |||||||||
| Temperature Ranges [Min] | -330 ºF | -50 ºF | -50 ºF | -50 ºF | -50 ºF | |||||
| Temperature Ranges [Max] | 1,100 ºF | 400 ºF | 400 ºF | 400 ºF | 400 ºF | |||||
| Connection Size | 1/2 in | |||||||||
| Accuracy | ±0.12% (±0.3 ºC) at 0 ºC, Class B | |||||||||
| Element Types | PT100 Ω at 0 ºC | |||||||||
| Circuit Types | Single, 2-Wire | Single, 3-Wire | Single, 3-Wire | Single, 3-Wire | Single, 3-Wire | |||||
| Electrical Connection | M12 x 1 (5-Pin) - Single Circuit Types Only | Integral Cable 36 in. | 1/2 in. National Pipe Thread (NPT) Conduit with 6 in. Flying Leads | 1/2 in. National Pipe Thread (NPT) Conduit with 6 in. Flying Leads | 1/2 in. National Pipe Thread (NPT) Conduit with 6 in. Flying Leads | |||||
| Standard Finish [Max] | 32 micro-inches maximum 32 µin | |||||||||
| Pressure Ratings for Tube | 500 psi34.5 bar | |||||||||
| Resistance Temperature Device (RTD) Element | PT100 Ω at 32 ºF (0 ºC), α=0.00385 International Electrotechnical Commission (IEC 751) | |||||||||
| Lead Wires | Stranded 22 AWG standard, Polyvinyl Chloride (PVC) or Polytetrafluoroethylene (PTFE) Insulation | |||||||||
| Self-Heating | 50 mW / ºC Typical in Moving Water | |||||||||
| Insulation Resistance |
Single Element Probes: 100 mega Ω/min. at 500 Vdc, Leads to Case Dual Element Probes: 100 mega Ω/min. at 100 Vdc, Between Element and Leads to Case |
|||||||||
| Transition | Sheath to Wire Transition Maximum Temperature 266 ºF (130 ºC) | |||||||||
| Warranty | 3 yr | |||||||||
| Stem Diameters | 1/8 in | 1/8 in | 1/4 in | 1/4 in | 1/4 in | |||||
| Stem Lengths | 2-1/2 in | 4 in | 6 in | |||||||
| Application |
|
|||||||||
| Limitations Which Apply Are |
These units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation. In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice. |
|||||||||
| Prop 65 Warnings |
 WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
|||||||||
| Thermowells | Thermowells allow a temperature instrument to be removed and replaced without shutting down and draining the process, and reduce the possibility of damage to the temperature instrument. | |||||||||
| Additional Information |
|
|||||||||
| Related Items |
50-025-304-SS, 1/2" National Pipe Thread (NPT) Straight Shank, 2-1/2" Length, 1/2" National Pipe Straight Mechanical (NPSM) Instrument Connection, 304 Stainless Steel Thermowell 50-025-316-SS, 1/2" National Pipe Thread (NPT) Straight Shank, 2-1/2" Length, 1/2" National Pipe Straight Mechanical (NPSM) Instrument Connection, 316 Stainless Steel Thermowell 75-025-304-SS, 3/4" National Pipe Thread (NPT) Straight Shank, 2-1/2" Length, 1/2" National Pipe Straight Mechanical (NPSM) Instrument Connection, 304 Stainless Steel Thermowell 75-025-316-SS, 3/4" National Pipe Thread (NPT) Straight Shank, 2-1/2" Length, 1/2" National Pipe Straight Mechanical (NPSM) Instrument Connection, 316 Stainless Steel Thermowell |
50-040-304-SS, 1/2" National Pipe Thread (NPT) Straight Shank, 4" Length, 1/2" National Pipe Straight Mechanical (NPSM) Instrument Connection, 304 Stainless Steel Thermowell 75-040-304-SS, 3/4" National Pipe Thread (NPT) Straight Shank, 4" Length, 1/2" National Pipe Straight Mechanical (NPSM) Instrument Connection, 304 Stainless Steel Thermowell 75-040-316-SS, 3/4" National Pipe Thread (NPT) Straight Shank, 4" Length, 1/2" National Pipe Straight Mechanical (NPSM) Instrument Connection, 316 Stainless Steel Thermowell |
50-060-304-SS, 1/2" National Pipe Thread (NPT) Stepped Shank, 6" Length, 1/2" National Pipe Straight Mechanical (NPSM) Instrument Connection, 304 Stainless Steel Thermowell 50-060-316-SS, 1/2" National Pipe Thread (NPT) Stepped Shank, 6" Length, 1/2" National Pipe Straight Mechanical (NPSM) Instrument Connection, 316 Stainless Steel Thermowell 75-060-304-SS, 3/4" National Pipe Thread (NPT) Stepped Shank, 6" Length, 1/2" National Pipe Straight Mechanical (NPSM) Instrument Connection, 304 Stainless Steel Thermowell 75-060-316-SS, 3/4" National Pipe Thread (NPT) Stepped Shank, 6" Length, 1/2" National Pipe Straight Mechanical (NPSM) Instrument Connection, 316 Stainless Steel Thermowell |
|||||||
| Note | Thermowells are recommended for pressure, corrosive fluids and high velocity applications. | |||||||||
| Stock | Yes | |||||||||
|
|
||||||||||
