Series |
N/A 58 |
Type |
N/A ES3 Sanitary Level Transmitter |
Nominal Span Adjustment Range |
N/A 0 to 350 psig |
Span Adjustment Range [Min] |
N/A 0 to 87 psig |
Range of Adjustment |
N/A 0 to 10 mH2O through 0 to 40 mH2O |
Transmitter Turndown Ratio |
N/A 4:1 |
Note for Span Adjustment Range |
N/A IMPORTANT! Accuracy, linearity, and non-repeatability values are based on adjusted span range. |
Operating Limit (Maximum Pressure) |
N/A Pressure above 300% nominal range (over-range) will result in damage to the transmitter (200% may cause a shift in calibration). |
Pressure Range |
N/A 87 to 350 psi |
Accuracy |
N/A
Less than ± 0.20% Adjusted Span Includes linearity, hysteresis, non-repeatability errors. |
Output |
N/A 4 to 20 mA |
Pressure Media |
N/A Gas or liquids compatible with Hastelloy (diaphragm); Silicone rubber (O-ring). All other wetted parts 316L. |
Process Connections |
N/A KING Standard |
Electrical Direct Current (DC) Input Voltage (Excitation) |
N/A 14 to 36 V |
Note for Electrical |
N/A HART® Protocol (Optional) |
Linearity (Worst Case) |
N/A
Less than ± 0.13% Full Scale Hysteresis (Worst Case) Less than 0.05% Full Scale |
Non-Repeatability (Worst Case) |
N/A Less than 0.02% Full Scale |
Options |
N/A Standard Options |
Operating Temperature [Min] |
N/A -20 ºC-4 ºF |
Operating Temperature [Max] |
N/A 100 ºC212 ºF |
Application |
N/A
|
2" Pipe Mount Adapter (304 Stainless Steel) |
N/A
Available in 304 SS only 5872-1-2: Adapter, NPT-M (male) thread, use standard sensor 5872-2-2: Adapter, NPT-F (female) thread, use standard sensor |
Anderson Shell Adapters (304 Stainless Steel) |
N/A
5878-1: Short Anderson shell, use standard sensor 5878-2: Long Anderson shell, use long sensor |
Cherry-Burrell Shell Adapters (304 Stainless Steel) |
N/A
Adapters available in 304 SS only 5640-1: Short Cherry-Burrell shell, use standard sensor 5640-2: Long Cherry-Burrell shell, use long sensor |
Continental/Floe/Wizard Shell Adapter (304 Stainless Steel) |
N/A 5665-1: Continental/Floe/Wizard shell, use standard sensor |
Flange Mount Adapter (316L Stainless Steel) |
N/A
5527-3: 2"- flange 316L Stainless, short mount 5527-5: 1-1/2"- flange 316L Stainless, short mount 5527-13: 3"- flange 316L Stainless, short mount 5527-15: 1"- flange 316L Stainless, short mount 5527-23: 4"- flange 316L Stainless, short mount 5627-3: 2"-150 class 316L Stainless flange, standard mount 5627-13: 3"-150 class ANSI, 316L Stainless 5627-23: 4"-150 class ANSI, 316L Stainless |
Flush Weld Tank Shell |
N/A
1777-2: Weld-in tank shell, short length sensor, 316L SS, length 1-7/8" (48 mm) Use for single wall (non-insulated) tank only! 1777: Weld-in tank shell, std length sensor, 316L SS, length 6-1/4" (159 mm) Use for single wall or insulated wall up to 4-1/2" thick 1777-3: Weld-in tank shell, long length sensor, 316L SS, length 8-1/2" (216 mm) Use for insulated wall up to 6-3/4" thick |
Foxboro/Rosemount Shell Adapters (304 Stainless) |
N/A
5905-1: 2" Ext. Foxboro/Rosemount, use standard sensor (Minimum 5 pcs order required (special)) 5905-2: 6" Ext. Foxboro/Rosemount, use long sensor (Minimum 5 pcs order required (special)) |
Liquid Scale Adapter (304 Stainless Steel) |
N/A 1749-35-1: Liquid scale adapter package, use long sensor |
Shell Seal Plug |
N/A
2584-4: Shell plug, fits short shell 2584-3: Shell plug, fits standard shell, tri-clamp, and short adapters 2584-6: Shell plug, fits long shell, long adapters |
Shell Welding Protector |
N/A 5664-1: Shell face protector, fits all weld-in shells |
Tank-Mate Shell Adapters (304 Stainless Steel) |
N/A
5641-1: Short Tank-Mate shell, use standard sensor 5641-2: Long Tank-Mate shell, use long sensor |
Tri-Clamp Adapter |
N/A
1749-25: Tri-clamp MP-2", 316L Stainless Steel; short length sensor 1749-27: Tri-clamp MP-2", 316L Stainless Steel; standard length sensor |
Sanitary Configurations |
N/A These sensors are especially suited to a wide range of sanitary applications on storage or continuous processing vessels. The Hastelloy diaphragm is appropriate for flush mount, clean-in-place installation employing an FDA-approved silicone rubber O-ring seal to achieve the crevice-free, positive compression seal between diaphragm and tank liner. Sanitary tank mountings include flush weld mountings with product contact surfaces of 316L stainless. (Quick disconnect sanitary adapters are also available for sensor mounting.) |
ES3 Signal Connection |
N/A The external connector of the ES3 transmitter affords an impermeable barrier against moisture infiltration of the transmitter housing. This connector receptacle has a metric M12 screw collar and is intended for plug type molded cable assemblies designed for 4-pole signal termination. Our ES3 transmitter package also includes a molded M12 cable (32 ft/10 m) to simplify installation and ensure a sealed connection at the unit - this molded cable meets IP68 standards for ingress protection. |
Additional Information |
N/A
All transmitters are fully temperature compensated ES3 Sanitary Level Transmitter
ES3 transmitters are applicable to most tanks or process vessels whose contents remain at normal atmospheric pressure. They measure hydrostatic head pressure created by liquid depth in the tank and are unaffected by foaming or internal obstructions such as agitators. Unlike load cells, pressure based measurement has lower installation cost and is far simpler to maintain thus ensuring more reliable readings. Transmitters used in sanitary processing must often endure cycles of rapid temperature fluctuation. Washdown environments produce significant condensation on metallic surfaces that coupled with aggressive cleansing agents demand robust protection for these instruments. The ES3 transmitter's enhanced design uses encapsulation for full isolation of the internal electronics. This extends to the IP68 grade M12 signal connector that ensure integrity and long term reliability. You can be assured of a transmitter truly built for the demands and expectations of today's processing environment. |
Product Warranty |
N/A
All KING-GAGE®, a NOSHOK Company products are guaranteed to be free from defects in material and workmanship for one (1) year from the date of purchase. Repair Services Warranty: 90 days limited warranty. |
Prop 65 Warnings |
N/A
 WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
