Type |
N/A Pneumatic Column Indicator |
Series |
N/A 7750S |
Scale |
N/A Stainless Steel Case, 51 in. Scale, 1 Unit |
Liquid |
N/A Red |
Note for Scale |
N/A Scale information must be supplied when order is placed. Package includes overflow check valve and Swagelok fitting (1/4" tube × 1/4 NPT) compatible with copper or poly tubing. |
Note for Liquid |
N/A Red Liquid 2.94 Specific Gravity; Scale Factor = 0.337 |
Fittings |
N/A Swagelok 1/4 in. Tube (Compatible with Copper or Polyflo Tubing) |
Operation Principle |
N/A Well-type manometer acts as a frictionless hydrostatic force-balance. A liquid fill is raised in direct proportion to the magnitude of pressure applied. (Varies based on type of indicating liquid employed) |
Process Connection |
N/A 1/4" NPT tapped connection for typical tube fittings. Accepts pneumatic air/gas pressure input; high and low pressure inputs. |
Materials of Construction |
N/A Formed channel indicator housing; brushed Stainless Steel (Type 304). Heavy plate glass window; acrylic plastic window available as special order. |
Wetted Parts Material |
N/A 316 Stainless Steel Liquid Well and Tubing |
Indicating Tube Material |
N/A High Strength, Fully Annealed Glass (Pyrex® - Pyrex® is a registered trademark of Corning, Inc.) |
KING-GAGE® Indicator |
N/A Single Display Tube, Available in Wall Mount Housing Only |
KING-GAGE® Indicator Scale Range |
N/A 20 in35 in43 in51 in66 in81 in |
KING-GAGE® Multi-Tube Indicator |
N/A Multiple display tubes; 2-, 4-, 6-, 8-, 10-tube configurations. Tubes are spaced on 2-5/16" centerlines. Available in either wall mount or flush panel mount housing with front bezel assembly. |
KING-GAGE® Multi-Tube Indicator Scale Range |
N/A 20 in30 in40 in50 in60 in80 in |
Resolution |
N/A Infinite based on type of indicating liquid employed. |
Physical Dimensions A |
N/A 59-1/8 in1502 mm |
Application |
N/A
|
Gauge Accessories |
N/A
8838: Overflow Check Valve 1/4 in. National Pipe Thread (NPT) Gauge Connection 7461-2: Overflow Return Reservoir 4530-1-1-1: SafeGard Range 25 to 650 in. Water Pressure, None, 1/4 in. National Pipe Thread (NPT) 4530-1-2-1: SafeGard Range 650 to 1750 in. Water Pressure, None, 1/4 in. National Pipe Thread (NPT) |
Glass Tube Packing Seal Kit |
N/A
5181-1: Glass Tube Packing Seal Kit
|
Indicating Liquids |
N/A
2992-8: Red Liquid No. 294, 8 fl oz. 2992-16: Red Liquid No. 294, 16 fl oz. |
Replacement Indicator Scales |
N/A
7083-20: Left and Right Side Pair, 20 in. Scale, 1-Unit 7083-35: Left and Right Side Pair, 35 in. Scale, 1-Unit 7083-43: Left and Right Side Pair, 43 in. Scale, 1-Unit 7083-51: Left and Right Side Pair, 51 in. Scale, 1-Unit 7083-66: Left and Right Side Pair, 66 in. Scale, 1-Unit 7084-20: Left and Right Side Pair, 20 in. Scale, 2-Units 7084-35: Left and Right Side Pair, 35 in. Scale, 2-Units 7084-43: Left and Right Side Pair, 43 in. Scale, 2-Units 7084-51: Left and Right Side Pair, 51 in. Scale, 2-Units 7084-66: Left and Right Side Pair, 66 in. Scale, 2-Units |
Service Parts |
N/A
5159-20: Glass Tube Replacement Kit, 20 in. 5159-35: Glass Tube Replacement Kit, 35 in. 5159-43: Glass Tube Replacement Kit, 43 in. 5159-51: Glass Tube Replacement Kit, 51 in. 5159-66: Glass Tube Replacement Kit, 66 in. 5181-1: Tube Packing Seal Kit 7560: Drain Plug 8806: Drain Plug Washer 7761: Reflector (Consult Factory) |
Tank Top Fittings |
N/A
1-1/2 in. National Pipe Thread (NPT) Tank Top Fitting (For 3/4 in. Pipe) Single Purge Line Connection with Tube Fitting 7746-13: Carbon Steel, Polyflo 3/8 in. Tube 7746-15: Carbon Steel, Swagelok 3/8 in. Tube 7746-18: 316 Stainless Steel, Swagelok 3/8 in. Tube 1-1/2 in. National Pipe Thread (NPT) Tank Top Fitting (For 3/4 in. Pipe) with single 1/4 in. National Pipe Thread (NPT) Purge Port Connection 2000FA: Carbon Steel 2000PA: Polyvinyl Chloride (PVC) 2000SG: 316 Stainless Steel 1-1/2 in. National Pipe Thread (NPT) Tank Top Fitting (For 3/4 in. Pipe) with Two 1/4 in. National Pipe Thread (NPT) Purge/Equalizer Connection 2000FA-2: Carbon Steel 2000PA-2: Polyvinyl Chloride (PVC) 2000SG-2: 316 Stainless Steel |
Indicator Scales |
N/A
The critical factor affecting accuracy of the indicator is the readout scale. KING-GAGE® scales are computer calibrated according to tank capacity curves (or from wet calibrations) to provide precise level indication for a specific tank. These scales can be graduated in practically any unit of measurement desired. In fact, 2-unit scales can provide a combination of weight, volume or depth indication. The size of the indicator (column height) is governed by the length of scale required. The combination of scale length and type of indicating liquid determines the actual pressure range of the indicator. Overall scale length can vary based on the range and resolution desired for the gauging application. Three types of indicating liquid are available. Mercury (silver) is best suited for deep tanks such as silos and provides the maximum pressure range. No. 294 (red) provides excellent visibility and works for most typical tank applications. No. 175 (purple) is the lightest fluid and is generally used for shallow tanks or special applications. |
Determining Scale Range |
N/A
Overall length of the scale can vary depending upon the range and degree of readability necessary for the application. This "readability" refers to the minimum readable change in liquid depth that can be observed at the indicator. Three factors must be applied to determine scale length: 1 - maximum tank depth 2 - specific gravity (density) of tank product 3 - type of indicating liquid (scale factor) A simple calculation using these factors will yield the minimum scale length required: D (depth) x G (sp. gr.) x L (liquid scale factor) = Scale Length The resulting value represents the scale sizes available for the type of indicator and select one that will accommodate the calculated length for your application. |
Overflow Check Valve |
N/A
Included as standard with all indicator packages. Prevents escape of liquid through the top of the tube should the indicator be overpressured. This float-type check valve is included with either the KING-GAGE® or Multi-Tube Indicators. |
SafeGard Control |
N/A This unit is an adjustable pressure-limiting control that prevents overpressuring of the indicator. Available as a separate component or can be ordered as part of a KING-GAGE® pneumatic sensor package. |
ClearGard Fluid |
N/A Designed for use with mercury, this specially formulated liquid silicone imparts a non-stick coating to the inside of the glass tube. Simply place a few drops to the top of the mercury column to prevent unsightly deposits from forming that could obscure the display. |
Additional Information |
N/A
Working as a frictionless hydrostatic balance, these indicators have none of the mechanical parts common to most gauges. This makes the KING-GAGE® Indicator an inherently accurate and extremely rugged device. Used in conjunction with a pneumatic 1:1 output sensor, the indicator accepts a pressure signal that is directly proportional to tank depth. Unlike electronic indicators or meters, KING-GAGE® pneumatic indicators are inherently safe. Even in areas designated continuous explosion hazard, there are no intrinsic safety devices required. These indicators are in use worldwide and have proven their dependability over decades of service. Pneumatic column indicator has tube with liquid fill that rises in proportion to tank level. Graduated scale indicates corresponding weight, volume or depth of tank contents. KING-GAGE® Indicator uses a pair of scales mounted on either side of the glass tube. 20 in. range scales in two units (pounds, gallons). Multi-Tube Indicator has a single scale mounted behind the glass tube. 30 in. range marked in one unit (pounds). |
Product Warranty |
N/A
All KING-GAGE®, a NOSHOK Company products are guaranteed to be free from defects in material and workmanship for one (1) year from the date of purchase. Repair Services Warranty: 90 days limited warranty. |
Prop 65 Warnings |
N/A
 WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
