1425333

58

ES3 Sanitary Level Transmitter

0 to 350 psig

0 to 10 mH₂O through 0 to 40 mH₂O

4:1

Pressure above 300% nominal range (over-range) will result in damage to the transmitter (200% may cause a shift in calibration).

87 to 350 psi

Less than ± 0.20% Adjusted Span
Includes linearity, hysteresis, non-repeatability errors.

KING Standard

HART® Protocol (Optional)

Less than ± 0.13% Full Scale
Hysteresis (Worst Case)
Less than 0.05% Full Scale

Less than 0.02% Full Scale

Transparent Cover + Hart®

6.62 in

2" Pipe Mount Adapter: Available in 304 SS only

5872-1-2: Adapter, NPT-M (male) thread, use standard sensor
5872-2-2: Adapter, NPT-F (female) thread, use standard sensor

Anderson Shell Adapter: 5878-1: Short Anderson shell, use standard sensor
5878-2: Long Anderson shell, use long sensor

Cherry-Burrell Shell Adapter: Adapters available in 304 SS only

5640-1: Short Cherry-Burrell shell, use standard sensor
5640-2: Long Cherry-Burrell shell, use long sensor

Continental/Floe/Wizard Shell Adapter: 5665-1: Continental/Floe/Wizard shell, use standard sensor

Flange Mount Adapter: 5527-3: 2"- flange 316L Stainless, short mount
5527-5: 1-1/2"- flange 316L Stainless, short mount
5527-13: 3"- flange 316L Stainless, short mount
5527-15: 1"- flange 316L Stainless, short mount
5527-23: 4"- flange 316L Stainless, short mount
5627-3: 2"-150 class 316L Stainless flange, standard mount
5627-13: 3"-150 class ANSI, 316L Stainless
5627-23: 4"-150 class ANSI, 316L Stainless

Foxboro/Rosemount Shell Adapter: 5905-1: 2" Ext. Foxboro/Rosemount, use standard sensor (Minimum 5 pcs order required (special))
5905-2: 6" Ext. Foxboro/Rosemount, use long sensor (Minimum 5 pcs order required (special))

Liquid Scale Adapter: 1749-35-1: Liquid scale adapter package, use long sensor

Tank-Mate Shell Adapter: 5641-1: Short Tank-Mate shell, use standard sensor
5641-2: Long Tank-Mate shell, use long sensor

Tri-Clamp Adapter: 1749-25: Tri-clamp MP-2", 316L Stainless Steel; short length sensor
1749-27: Tri-clamp MP-2", 316L Stainless Steel; standard length sensor

2584-4: Shell plug, fits short shell
2584-3: Shell plug, fits standard shell, tri-clamp, and short adapters
2584-6: Shell plug, fits long shell, long adapters

5664-1: Shell face protector, fits all weld-in shells

The external connector of the ES3 transmitter affords an impermeable barrier against moisture infiltration of the transmitter housing. This connector receptacle has a metric M12 screw collar and is intended for plug type molded cable assemblies designed for 4-pole signal termination. Our ES3 transmitter package also includes a molded M12 cable (32 ft/10 m) to simplify installation and ensure a sealed connection at the unit - this molded cable meets IP68 standards for ingress protection.

All transmitters are fully temperature compensated

ES3 Sanitary Level Transmitter

• Robust protection in washdown environments
• Continuous liquid level measurement
• Two Wire Loop Powered (4 mA to 20mA)

KING-GAGE® ES3 transmitters provide liquid level measurement for inventory monitoring. Add to their rugged reliability the major benefits of simplified service and maintenance. Performance characteristics of these transmitters include excellent stability and repeatability. The ES3 transmitters are very easily adjustable without test pressure by three pushbuttons and display.

ES3 transmitters are applicable to most tanks or process vessels whose contents remain at normal atmospheric pressure. They measure hydrostatic head pressure created by liquid depth in the tank and are unaffected by foaming or internal obstructions such as agitators. Unlike load cells, pressure based measurement has lower installation cost and is far simpler to maintain thus ensuring more reliable readings.

Transmitters used in sanitary processing must often endure cycles of rapid temperature fluctuation. Washdown environments produce significant condensation on metallic surfaces that coupled with aggressive cleansing agents demand robust protection for these instruments. The ES3 transmitter's enhanced design uses encapsulation for full isolation of the internal electronics. This extends to the IP68 grade M12 signal connector that ensure integrity and long term reliability. You can be assured of a transmitter truly built for the demands and expectations of today's processing environment.

All KING-GAGE®, a NOSHOK Company products are guaranteed to be free from defects in material and workmanship for one (1) year from the date of purchase.

Repair Services Warranty: 90 days limited warranty.

Not rated for explosion hazard areas, includes Hubbell nylon cord connector.

IMPORTANT! Accuracy, linearity, and non-repeatability values are based on nominal range.