5111-10

LevelBAR Electronic Column Indicator

5111

4 to 20 mA

304 Stainless Steel housing and cover with gasket seal, transparent polycarbonate display window. Intended to meet splash proof requirements. The use of waterproof conduit hubs or fittings may be required during installation. Not rated for continuous explosion hazard areas.

60 Hz

50 Hz

10 in

24 V

0 psid

1 %

100 to 240 V

100-Segment Light Emitting Diode (LED)

mA Input: 4-12 mAdc through 4-20 mAdc

150 O

Automatic trip/reset circuit using PTC (positive temperature coefficient) resistor holds maximum current level within operating range of internal components.

4 to 12 mA DC (Minimum) to 4 to 20 mA DC Full Scale Range

7469-21-0: 500 mA 250 V Fast Acting (AGC) Fuse, 0.25 x 1.25 in, Replacement 5-Pack

5858-2: 2-Terminal Connector

5858-3: 3-Terminal Socket Connector

A standard 1-unit scale is included in the package price listed for LevelBAR models. The LevelBAR scale is custom marked in any specified unit of measurement (gallons, liters, barrels, etc.). An optional 2-unit scale can combine any two different measurements such as weight and volume, or volume and depth.

When ordering, the following information must be supplied. If replacing an existing scale, also provide the original serial number.

• Specific Gravity (Density) of Tank Contents
• Product Designation (tank contents)
• Description of Tank (e.g., Walker 6000 gal silo)
• Tank Dimensions
• Tank Name (to be noted on scale)
• Pressure Range of transmitter or LevelBAR
• Scaling Units (e.g., lbs, gals, liters, etc.)

Scales are calculated for the individual tank geometry and product specific gravity. Scaling adjustments setting (REF HIGH) is noted on the side of the scale. This is used to set the full scale display based on pressure range of the transmitter and maximum pressure created by depth of tank product.

Tank Calibrations - The LevelBAR indicator should not be used for physical water calibrations of tanks. Use of a pressure standard or other high accuracy pressure measurement instrument is recommended.

5980-11: Replacement 1-Unit LevelBAR Scale Assembly

5980-21: Replacement 2-Unit LevelBAR Scale Assembly

Scales are calculated for the individual tank geometry and product specific gravity permitting the LevelBAR system to be used for almost any kind and shape of tank, including horizontal cylindrical storage tanks. Custom marked in any specified unit of measurement (gallons, liters, pounds, etc.), it may also be ordered with an optional 2-unit scale that combines any two different measurements of weight, volume, or depth. Factory calibration allows full scale ranging of the display when maximum input is less than 20 mA to eliminate field span adjustment of the level transmitter.

Electronic input (4-20 mA two wire)

The electronic input version accepts a standard 4–20 mAdc signal from typical two wire pressure transmitters. These models include watertight cord grip (strain relief) connectors, factory calibration, and custom marked scale.

• High Visibility Tank Level Display
• Individually Calibrated Indicator Scale
• Electronic (4-20 mA) or Pneumatic Input
• Direct Replacement for Manometer Gauges

The KING-GAGE® LevelBAR (v2) delivers a bright multi-segment LED column to graphically indicate tank level. The system monitors tank level by reading the proportional 4-20 mA signal output from compatible two wire level transmitters. The available D/P option alternatively accommodates direct pneumatic pressure measurement.

The multi-segment LED column provides graphic indication of tank levels for operations personnel. Rugged stainless steel housing resists corrosion affording protection for the internal electronics and is intended to meet splash proof requirements. A backlighting feature makes the scale readable in the absence of ambient illumination while the red LED column is viewable even in bright daylight.

LevelBAR indicators can be used singly or in multiples to provide additional display locations simply by extending the signal loop circuit. This tank level display takes the guesswork out of installation and troubleshooting with practical elements such as loop circuit status (on/off/open) and fault (short) indicators. With the available differential pressure (D/P) option, the LevelBAR indicator can be used as a direct replacement for mercury tank gauges or other fluid-filled manometers.

All KING-GAGE®, a NOSHOK Company products are guaranteed to be free from defects in material and workmanship for one (1) year from the date of purchase.

Repair Services Warranty: 90 days limited warranty.

Scale information must be supplied when order is placed.