5111-31

LevelBAR Electronic Column Indicator

5111

4 to 20 mA

304 Stainless Steel housing and cover with gasket seal, transparent polycarbonate display window. Intended to meet splash proof requirements. The use of waterproof conduit hubs or fittings may be required during installation. Not rated for continuous explosion hazard areas.

60 Hz

50 Hz

10 in

24 V

0 psid

10 psid

1 %

100 to 240 V

100-Segment Light Emitting Diode (LED)

0 to 138 inH₂O

0 to 276 inH₂O

Hand Pump Operation for Downpipe Purge

150 O

Automatic trip/reset circuit using PTC (positive temperature coefficient) resistor holds maximum current level within operating range of internal components.

4 to 12 mA DC (Minimum) to 4 to 20 mA DC Full Scale Range

7469-21-0: 500 mA 250 V Fast Acting (AGC) Fuse, 0.25 x 1.25 in, Replacement 5-Pack

5858-2: 2-Terminal Connector

5858-3: 3-Terminal Socket Connector

A standard 1-unit scale is included in the package price listed for LevelBAR models. The LevelBAR scale is custom marked in any specified unit of measurement (gallons, liters, barrels, etc.). An optional 2-unit scale can combine any two different measurements such as weight and volume, or volume and depth.

When ordering, the following information must be supplied. If replacing an existing scale, also provide the original serial number.

• Specific Gravity (Density) of Tank Contents
• Product Designation (tank contents)
• Description of Tank (e.g., Walker 6000 gal silo)
• Tank Dimensions
• Tank Name (to be noted on scale)
• Pressure Range of transmitter or LevelBAR
• Scaling Units (e.g., lbs, gals, liters, etc.)

Scales are calculated for the individual tank geometry and product specific gravity. Scaling adjustments setting (REF HIGH) is noted on the side of the scale. This is used to set the full scale display based on pressure range of the transmitter and maximum pressure created by depth of tank product.

Tank Calibrations - The LevelBAR indicator should not be used for physical water calibrations of tanks. Use of a pressure standard or other high accuracy pressure measurement instrument is recommended.

5980-11: Replacement 1-Unit LevelBAR Scale Assembly

5980-21: Replacement 2-Unit LevelBAR Scale Assembly

Scales are calculated for the individual tank geometry and product specific gravity permitting the LevelBAR HP system to be used for almost any kind and shape of tank, including horizontal cylindrical storage tanks. Each is custom marked in any specified unit of measurement (gallons, pounds, liters, short tons, etc.). An optional 2-unit scale can be specified to combine any two different measurements such as weight and volume, or volume and depth.

• Self-Contained Hand Pump System
• On Demand Monitoring of Tank Level
• Individually Calibrated Indicator Scale

The KING-GAGE® LevelBAR HP bright multi-segment LED column provides graphic indication of level for tank gauging applications. This self contained unit is operated by means of an integral hand pump to pressurize the system. It will provide on-demand monitoring of tank level by measuring hydrostatic pressure created by liquid depth. The LevelBAR HP is applicable to fuel oil, waste water and other above or below ground storage or holding tanks.

All LevelBAR indicators include a custom graduated tank level scale in units of total volume, weight or depth of the liquid contents. A backlighting feature makes the scale readable in the absence of ambient illumination while the red LED column is viewable even in bright daylight. LevelBAR HP indicator can be used as a direct replacement for mercury tank gauges or other fluid-filled manometers.

This unit is well adapted for isolated tank level gauging applications where continuous readings are not required. Rugged stainless steel housing resists corrosion while affording suitable protection for the internal electronics and intended to meet splash proof requirements. The use of waterproof conduit hubs or fittings may be required during installation. Not rated for continuous explosion hazard areas. (Requires 100-240 Vdc 50/60 Hz power.)

Simple proven principle employs a hand pump to supply air which fills the downpipe inserted into the tank liquid. The resulting pressure created (within the pipe) and sensed by the indicator is directly proportional to liquid depth.

All KING-GAGE®, a NOSHOK Company products are guaranteed to be free from defects in material and workmanship for one (1) year from the date of purchase.

Repair Services Warranty: 90 days limited warranty.

Scale information must be supplied when order is placed.