5502-3-50

550 Series ES2 Slimline Level Transmitter

Slimline Level Transmitter

0 to 50 psig

Standard Mount (Insulated Wall Up to 4.5 in./114 mm; or Adapter for Non-KING "Short" Shell)

Cable with Integral Molded Connector (M12)

0 to 415 inH₂O through 0 to 1384 inH₂O, 0 to 10.5 mH₂O through 0 to 35.1 mH₂O

Pressure above 300% nominal range (over-range) will result in damage to the transmitter (200% may cause a shift in calibration).

Less than ±0.20% full scale (Includes linearity, hysteresis, non-repeatability errors)

Less than ±0.13% Full Scale
Hysteresis (Worst Case)
Less than 0.05% Full Scale

Less than 0.02% Full Scale

1747-40: FKM O-Ring
1751: Clamp Nut
6495-125: O-Ring, Housing End Cap seal
6554-40: O-Ring, Silicone Rubber (Standard)
6554-44: O-Ring, Oversized (Special Application)
5378-2-1: Field Wireable Connector (M12) 4-pin Female with Color Reference
5630-5: FRP Junction Enclosure (includes 2 Cable Fittings)
8027-10: ES2 Molded Cable with Integral M12 Plug Connector (32 ft /10 m) on One End
8027-25: ES2 Molded Cable with Integral M12 Plug Connector (82 ft / 25 m) on One End

2" Pipe Mount Adapter: Available in 304 SS only

5872-1-2: Adapter, NPT-M (male) thread, use standard sensor
5872-2-2: Adapter, NPT-F (female) thread, use standard sensor

Anderson Shell Adapter: 5878-1: Short Anderson Shell, Use Standard Sensor

Cherry-Burrell Shell Adapter: Adapters available in 304 SS only

5640-1: Short Cherry-Burrell Shell, Use Standard Sensor

Continental/Floe/Wizard Shell Adapter: 5665-1: Continental/Floe/Wizard Shell, Use Standard Sensor

Flange Mount Adapter: 5627-3: 2"-150 Class 316L Stainless Flange, Standard Mount
5627-13: 3"-150 Class ANSI, 316L Stainless
5627-23: 4"-150 Class ANSI, 316L Stainless

Foxboro/Rosemount Shell Adapter: 5905-1: 2" Ext. Foxboro/Rosemount, Use Standard Sensor(Minimum 5 pcs Order Required (Special))

Tank-Mate Shell Adapter: 5641-1: Short Tank-Mate Shell, Use Standard Sensor

Tri-Clamp Adapter: 1749-27: Tri-Clamp MP-2", 316L Stainless Steel; Standard Length Sensor

5668-1: Short Mount Fixture
5668-2: Standard Mount Fixture
5668-3: Long Mount Fixture

2584-4: Shell plug, fits short shell
2584-3: Shell plug, fits standard shell, tri-clamp, and short adapters
2584-6: Shell plug, fits long shell, long adapters

5664-1: Shell face protector, fits all weld-in shells

Flush-mounting configurations are intended to meet the 3-A Sanitary Standards for clean-in-place applications. The ES2 transmitter fits directly into KING-GAGE® tank shells or with an adapter on other manufacturers' mounting shells.

Available Retrofit Adapters

• Cherry-Burrell LevelMatic
• Anderson Instrument
• Rosemount/ Foxboro
• Tank Mate
• Wizard

The KING-GAGE® ES2 transmitter offers a choice of configurations to match your application needs. The integral stainless steel housing shown here includes a watertight connector for signal cable installation. Mounting lengths offered are intended to mate with tank fittings on non-insulated (single-wall) or insulated wall tanks. Adapters provide additional mounting options when retrofitting systems from other manufacturers.

ES2 Slimline Transmitter

• Robust protection in wash-down environments
• Continuous liquid level measurement
• Two Wire Loop Powered (4–20 mA)

KING-GAGE® ES2 transmitters provide liquid level measurement for inventory monitoring. Add to their rugged reliability the major benefits of simplified service and maintenance. Performance characteristics of these transmitters include excellent stability and repeatability (better than 0.02% FS). Transmitter span accommodates a 3:1 turndown ratio (3:1 turndown ratio is applicable to 0–10 and 0–30 nominal range, refer to specifications for detailed span adjustment available on specific range models.) to match the application pressure range (i.e. tank depth) and the 4-20 mAdc output is compatible with PLCs or other control architecture using analog I/O.

KING-GAGE® ES2 transmitters are applicable to most tanks or process vessels whose contents remain at normal atmospheric pressure. They measure hydrostatic head pressure created by liquid depth in the tank and are unaffected by foaming or internal obstructions such as agitators. Unlike load cells, pressure based measurement has lower installation cost and is far simpler to maintain thus ensuring more reliable readings.

Transmitters used in sanitary processing must often endure cycles of rapid temperature fluctuation. Wash-down environments produce significant condensation on metallic surfaces that coupled with aggressive cleansing agents demand robust protection for these instruments. The ES2 transmitter's enhanced design uses encapsulation for full isolation of the internal electronics. This extends to the IP68 grade M12 signal connector that ensure integrity and long term reliability. You can be assured of a transmitter truly built for the demands and expectations of today's processing environment.

All KING-GAGE®, a NOSHOK Company products are guaranteed to be free from defects in material and workmanship for one (1) year from the date of purchase.

Repair Services Warranty: 90 days limited warranty.